Termékek vásároljon hegesztőgázt közelről (47)

Soudure - Tig - Mig (Acier - Inox - Aluminium)- par points et au robot

Nez Conique À Souder Inox Poli

Mecanic Systems, wishing to supply semi-finished and finished items, has equipped itself with several digitally controlled multi-purpose hydraulic bending machines (stamp + V). These guarantee the production of a vast range of items with a maximum length of 3,000mm. The tolerance for these operations is +/- 0.1mm per bend. Unfortunately, we cannot coil with this type of machine, but we can achieve facet folding (small bends every 5 or 10mm to arrive at the required radius). A sketch or a drawing is all that is needed for a positive or negative reply to bending with our equipment. For special bending requirements, a tool could possibly be designed for you.

Manual and robot welding, as well as point welding ( Steel - Inox - Aluminium )

- Power : Watts - Precision +/- 0.1mm - Displacement : 3000 x 1500 - Max thickness : Steel 12 mm, Stailess steel 6 mm, Aluminium 5 mm

With the acquisition in June 2011 of the Fiber Laser we have the possibility to work in combined mode as if we had a combination machine: punching takes place on the 5000R and laser cutting on the Fiber Laser after a very accurate optical calibration. This technology allows to get the best of both worlds: simple shapes are cut at optimal speed on the punching machine whereas more complex shapes are cut with the Fibre laser after optical calibration. It is also possible to perform thread forming and dimpling (form countersinking). The accuracy of these machine is 0.1 mm for metal sheets up to 3000x1500mm. They are equipped with an automatic loader and unloader.

Té Court À Souder Inox Poli

Inox 316L Poli/Gepolijst Inox 304L Poli/Gepolijst - Sur demande/Op aanvraag

Inox 316L Poli/Gepolisjt Ra ≤ 0,4µm Material certification 3.1

Inox 316L Poli/Gepolisjt Ra ≤ 0,4µm Material certification 3.1

Regard À Souder (collier Clamp) Inox Poli

Double Coude À Souder Inox Poli

Raccord Union Complet À Souder

Raccord Union À Souder Sms

Inox 316L Poli/Gepolisjt Ra ≤ 0,4µm Material certification 3.1

This operation allows : Dimensioning the sheets from a standard format before machine runs. Supply of mill sheets to the customer's dimensions with a precision of ±0.2mm according to thickness.

To answer the increasing demands of our customers, we are now equipped with a sheet metal rolling machine which allow rolling of 2000 mm wide by up to 3 mm thick plates for a minimum diameter of 140 mm. Providing a drawing or a sketch is enough to answer on the possibility of performing the rolling of a specific piece.

Mecanic systems a été un des 1er en Belgique (1983) à faire confiance à cette technologie de découpe au laser. La découpe laser est sans limite au niveau de la géométrie de la pièce à réaliser, n'engendre aucune déformation ni dépouille au niveau de la coupe et permet d'atteindre une précision de +/- 0.1mm. Evoluant sans cesse, Mecanic Systems investit régulièrement dans des machines de plus en plus performantes, fiables, rapides et productives grâce à un système de chargement et de déchargement automatique. La variété des machines de découpe permet un choix le plus adéquat possible ce qui garantit au client des prix très concurrentiels.

Machining

Regard À Souder Inox Poli

Nez Fileté À Souder Inox Poli

Mecanic Systems, thanks to its machining division, can offer its customers the following services: -dimpling -tapping -brushing -inserting (see photograph) -tool machining -levelling machine

Mecanic Systems was one of the first in Belgium to put their faith in this revolutionary "LASER" blanking technology. A LASER transforms electrical energy into a laser beam oriented by mirrors that can be focused on a surface diameter of less than 0.2mm. As a factory tool, the laser is rapid, free from wear and tear and other constraints and of high precision. . This technology has the advantage of having no limit in terms of the geometry of the item, presents no deformation or relief in terms of cutting, and is accurate to +/- 0.1mm. Mecanic Systems, in a permanent state of evolution, regular invests in machines that are increasingly efficient, reliable, rapid and productive thanks to their automatic loading and unloading systems.

- 6 axis/1250mm

Clapet Anti-retour À Souder 316 L-epdm

Machining

- Power : 500 Watts - Precision +/- 0.1mm - Displacement : 3000 x 1500 - Max thickness : Steel 25mm, Stainless steel 20 mm, Aluminium 13mm

- Power : 500 Watts - Precision : +/- 0.1mm - Displacement : 3000 x 1500 - Max thickness: Steel 25mm, Stainless steel 20 mm, Aluminium 13mm

Vanne À Boule À Souder

Machining