Termékek acélunk (110)

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Material: Steel-plate cover, frame made of cold formed sections. Hot-dip galvanised. With hinge. Cover can be removed from the open position. Covered hasp locking device (padlock not included). Ventilation pipe (Ø 10 cm) fitted with cowl and insect-excluding mesh. Sealed with hollow chamber seal. Applications: For individual wells, spring water catchments, high-level tanks etc. Total height including ventilation cylinder ≈ 30 cm. *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work. Versions: In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors. The Lift-Off opening system: Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the...

Kein Auftrag ist uns zu groß Kundenindividuelle Sonderlösungen sind unsere Spezialität. Wir übernehmen Planung, Einkauf der Bauteile, Fertigung und die Inbetriebnahme vor Ort. Dabei behalten wir stehts unser Ziel vor Augen: individuelle und qualitativ hochwertige Lösungen für unsere Kunden. Zu unseren zahlreichen Projekten zählen etwa: • Schotterförderanlagen • Behälterbau • Förderungsanlagen • Einhausungen und Verkleidungen • Sonderlösungen für PS starke Fahrzeuge • ...

Individuell und mit bester Optik Wir realisieren Stiegen, Zäune und Geländer für Privathaushalt und Gewerbe. Von der Planung bis hin zur Montage können Sie auf HTU zählen!

Präzisionsschmiedeteile, Gesenkschmiedestücke, Gesenkschmiedestücke Organisation von Gesenkschmiedestücken Produzentenvermittlung, Schmiedeteile für die Automobilindustrie, Schmiedestücke Dienstleistungen: - Vermittlung von Anfragen / Anboten zur Herstellung von kundenspezifischen Zeichnungsteilen - Lieferantenvorstellung beim Kunden - Kundenberatung hinsichtlich Herstellungsverfahren und Produktoptimierung - Laufende Kundenbetreuung in Zusammenarbeit mit dem Vertrieb des Fertigungspartners - Im Auftragsfall gesamte Abwicklung direkt zwischen Lieferant und Kunde

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. High-load hinges. High-specification double-piston gas struts. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaranteed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: For installations which require access without particular effort. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paving stones or paviors etc. Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our...

Drehteile mit Oberflächenbehandlung Drehteile nach Zeichnung Drehteile nach Vorgabe Vermittlung Dienstleistungen: - Vermittlung von Anfragen / Anboten zur Herstellung von kundenspezifischen Zeichnungsteilen - Lieferantenvorstellung beim Kunden - Kundenberatung hinsichtlich Herstellungsverfahren und Produktoptimierung - Laufende Kundenbetreuung in Zusammenarbeit mit dem Vertrieb des Fertigungspartners - Im Auftragsfall gesamte Abwicklung direkt zwischen Lieferant und Kunde

Load capacity: pedestrian Material: BV-shallow: frame and cover in 2mm cold formed precision steel profiles, hot-dip galvanised. BVE-shallow: frame and cover made of grade 304 stainless steel. Features: Sealed. Cover with an installation depth of only 5 cm. Particularly suitable for situations where greater installation depth is not available. Since the cover is shallower, this means that it is not so heavy when filled in - so less effort is required to lift the cover. The bottom of the cover is reinforced. EPDM seal. Tapered design allows easy opening. Steel reinforcement guarantees good adhesion between the concrete infill and the bottom of the cover. The Lift-Off opening system: Every HAGODECK Type BV(E) shallow cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For pedestrian use inside buildings and their surroundings. Installation: Installation must...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Im medizinischen Bereich ist die Frage nach hygienische Materialien groß. Es ist uns gelungen in diesem Breich einen Fuß in die Tür zu setzen. Bei der Zusammenarbeit mit Raumausstattern & Laboratorien ist unsere Kompetenz sehr gefragt.

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Die Spritzfolienabdichtung ist ein 2 Komponentenverfahren auf Polyurethanbasis. Durch die sich ständig weiterentwickelnde Bautechnologie kommt auch den Aspekten des Schutzes und der hochelastischen Abdichtung von Stahlbetonbauwerken eine immer größere Bedeutung zu. Bei der Spritzfolienabdichtung handelt es sich um eine Spezialtechnik, bei der die Polyurethan-Abdichtung mittels spezieller, maschineller Heißspritztechnik auf verschiedenste Untergründe und komplizierte Geometrien appliziert wird.Anwendungsgebiete sind die Abdichtungen von Brückenm Betonböden, Auffangbehältern, Silos, Kanälen, Terrassen, Unterführungen, Stahlbetonbauwerke und Parkdeckbeschichtungen.

Formrohrfräsarbeit für eine Rahmenkonstruktion Toleranzbereich 0,05mm/12m

Fußbodenkonstruktionen sind hinsichtlich ihrer Nutzung und Frequentierung, sowie zu erwartender Beanspruchung differenziert zu betrachten. Bei der Wahl und Planung von Industrieböden ist zu berücksichtigen, ob es sich um Sanierung, Revitalisierung oder Neubau handelt. Böden sind je nach Nutzung speziellen Belastungen ausgesetzt. Neben hohen Anforderungen an die mechanische und chemische Belastbarkeit (ein wichtiges Kriterium besonders im Industriebereich, bei Parkgaragen, etc.), ist auch das repräsentative Aussehen häufig von großer Bedeutung (z.B. in Einkaufszentren). Eine bedeutsame Funktion hat auch die leichte, hygienische Reinigung und Pflegemöglichkeit des Bodens, besonders im Bereich von Krankenanstalten.

Load capacity: 15 kN test load EN 124. Material: Frame, plate and reinforcement in grade 304 stainless steel. Features: Sealed cover. EPDM seal. Completely rust-proof. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where absolute corrosion-resistance is of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.