Termékek acélunk (599)

SPIROL Standard Slotted Spring Pins SPIROL Standard Slotted Spring Pins have a slot width narrower than the wall thickness and thus do not nest or interlock. This feature, combined with a smaller expanded (pre-insertion) diameter, results in a number of advantages for SPIROL Standard Slotted Pins compared to ISO 8752 pins including: • Lower insertion force and smoother insertion. • Rounder pins, which in turn results in better conformance of the pin to the hole wall and eliminates the edge of the slot damaging the hole during insertion. • Lower stress in the spine of the installed pin. This results in longer pin life in shock or fatigue applications. • Ability to use automatic vibratory feeding of pins for installation without interlocking. • Plating of pins for additional corrosion resistance or appearance without “touch marks” or the bonding of nested pins. Please visit www.SPIROL.com to learn more!

SPIROL propose une gamme de rondelles ressort en acier inoxydable austénitique dans des diamètres allant de Ø8 mm à Ø71 mm. L'acier inoxydable austénitique est généralement utilisé pour les applications statiques et à faible cycle qui nécessitent un niveau élevé de résistance à la corrosion. Il résiste très bien à l'eau douce et aux conditions atmosphériques marines, et convient à de nombreuses autres conditions industrielles, y compris les environnements acides. Ce matériau continue à se durcir à l'usage, la durée de vie est donc limitée, mais la résistance au fluage est bonne. SPIROL fournit des rondelles ressort individuels ainsi que des rondelles ressort pré-empilés dans des configurations personnalisées, emballés dans un film rétractable avec une languette perforée pour faciliter l'assemblage.

SPIROL's FH400 Headed Barbed Pin has a series of barbs extending down the entire length of the pin. Headed Barbed Pins are a great replacement for self-tapping screws in plastic assemblies as Barbed Pins are installed into standard moulded (or drilled) holes, they install much faster than screws, and they eliminate issues associated with cross-threaded or skewing during installation. Unlike screws that resist back-out (or loosening) by being tightened to a preset torque, Barbed Pins are retained by the plastic backfilling over the aggressively-designed barbs. The head provides a positive stop and is also used to retain a thin component to a thicker component within an assembly. SPIROL's FH400 Headed Barbed Pins are available in metric diameters ranging from Ø2mm to Ø6mm and inch diameters ranging from Ø.078" (5/64) to Ø.250" (1/4) in low carbon steel and austenitic stainless steel.

SPIROL invented the Coiled Spring Pin in 1948. Truly an engineered fasteners, the Coiled Pin is available in three duties, light, standard and heavy, to enable the designer to choose from the optimum combination of strength, flexibility and diameter to suit different host materials and application requirements. Their shock absorbing design dampens forces and vibration to prevent hole damage and prolong assembly life. Light Duty Coiled Spring Pins are generally recommended for soft, brittle or thin materials such as plastics, aluminium, die castings, ceramics, and where holes are located close to an edge of the assembly. In situations not subjected to significant loads, such as when used purely for alignment or as an axle, light duty Coiled Pins are often used because of easy installation resulting from lower insertion force.

SPIROL's FH300 Headed Helical Knurled Pin has the same body style as the KP300 Helical Knurled Pin, with the addition of a head. A Headed Pin is typically used to provide a positive stop or to retain a thin component to a thicker component within an assembly. FH300 Headed Helical Knurled Pins have a flat head, however they are available to order with a round head (RH300) to meet specific application requirements. Similar to the SPIROL Series KP300 Helical Knurled Pin offering, SPIROL's FH300 Headed Helical Knurled Pins are available in metric diameters ranging from Ø2mm to Ø6mm and inch diameters ranging from Ø.078" (5/64) to Ø.250" (1/4) in low carbon steel and austenitic stainless steel.

SPIROL offers Spacers specifically designed for use in conveyor systems and garage door hinge assemblies. Both SPIROL's Conveyor Spacers and Garage Door Spacers are manufactured from galvanised steel to provide the necessary strength and corrosion protection at a fraction of the cost of plated cutoff tubing and machined bushings. SPIROL stocks the raw material and tooling required to manufacture the standard sizes of Conveyor Spacers and Garage Door Spacers. Intermediate lengths can be produced without additional tooling.

SPIROL fabrica Pasadores Elásticos en Espiral de acero inoxidable 316 para satisfacer los requerimientos de aplicaciones específicas. El acero inoxidable tipo 316 es similar al acero inoxidable tipo 302/304 con un poco mayor contenido de níquel y la adición de molibdeno. El contenido de molibdeno aumenta en gran manera la resistencia química de esta aleación. El 316 muestra una mayor resistencia contra las picaduras debido al agua de mar, ácido acético, salmueras de cloruro, sodio y calcio, soluciones de hipoclorito, ácido fosfórico y los licores de sulfito y ácidos sulfurosos utilizados en la industria del papel y la pulpa. Esta aleación también es austenítica, no magnética y no endurecible mediante métodos convencionales. El acero inoxidable 316 tiene mejores propiedades mecánicas a temperaturas elevadas que el 302/304 y ofrece una excelente integridad mecánica a temperaturas bajo cero. Las aplicaciones típicas de los Pasadores en Espiral de acero inoxidable 316 de SPIROL incluyen la

SPIROL's Series 880 Coiled Spring Pin was designed specifically for use as the hinge pin for PC board card lock and ejector clip mechanisms. The quality of the hinge is unsurpassed by other fastening methods due to the low insertion force and compression of the pin during and after installation. As with all Coiled Spring Pins, the Series 880 hinge pin for PC board card locks and ejector clips is self-retaining, and thus no secondary processes are required for retention. The Coiled Pin's uniform radial spring force results in a controlled hinge movement that remains consistent throughout the life of the assembly.

Der Industriedruckmessumformer DMP 335 basiert auf einem verschweißten Drucksensor aus Edelstahl, welcher keine Druckübertragungsflüssigkeit besitzt. Diese Eigenschaft ist von besonderem Nutzen bei Applikationen bei denen Silikonöl oder Elastomerdichtungen nicht verwendet werden können. Merkmale: — Nenndrücke: 0 ... 16 bar bis 0 ... 600 bar — Genauigkeit: 0,5 % FSO — geeignet für Sauerstoffapplikationen — unempfindlich gegen Druckspitzen — hoch überlastfähig Optionale Merkmale: — Ex-Ausführung Ex ia = eigensicher für Gase und Stäube — kundenspezifische Ausführungen

Der Differenz-Drucktransmitter DPT 200 wurde speziell für die Prozessindustrie konzipiert. Typische Einsatzbereiche sind z.B. die Füllstandsmessung von geschlossenen, druckbeaufschlagten Behältern, Überwachung von Pumpen- oder Filteranlagen, u.v.m. Beim DPT 200 besteht die Möglichkeit verschiedene Druckmittler mit unterschiedlichen Membranmaterialien anzubauen, um eine optimale Anpassung an die Applikation zu erreichen. Merkmale: — Differenzdruck von 1 mbar bis 20 bar — statischer Druck bis max. 400 bar — Turn-Down max. 100:1 — Genauigkeit: 0,075 % FSO — HART®-Kommunikation — Ausgangssignal: linear oder radiziert — Aluminiumgehäuse Optionale Merkmale: — Ex-Ausführungen: Ex ia = eigensichere Ausführung (Gruppe II) Ex ia=eigensichere Ausführung für schlagwettergefährdete Bergwerke (Gruppe I) Ex d = druckfeste Kapselung (Gruppe II) — LC-Display — Edelstahl-Gehäuse Material:Edelstahl

SPIROL is a technical resource that provides high quality components that improve the quality of your assembly, extend the life of your products and reduce your manufacturing costs. We are the leading global manufacturer of engineered fasteners, shims, installation machines, and parts feeding equipment producing over two billion components annually. In addition to high quality products, SPIROL has Application Engineers throughout the world to assist you in your designs, supported by state-of-the-art manufacturing centers and global stocking facilities to simplify the logistics of delivering your product. If you have any questions or would like complimentary Application Engineering support, please feel free to contact us at any time!

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials Housing material:stainless steel Signal output:Digital - Modbus RTU/RS485 measuring cell:stainless steel

SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.

The SPIROL Model PH Heat Insert Driver provides an accurate and consistent method to simultaneously install multiple Threaded Inserts or Compression Limiters at multiple elevations. Simultaneous installation dramatically increases productivity and simplifies the number of manufacturing steps to complete an assembly. Additionally, the platen head and fixture can be easily changed to accommodate quick change-over to different assemblies associated with new production runs. This machine can be used to install 12 Inserts into 1 assembly, or a fewer number of Inserts into a larger number of assemblies – as long as the total combination does not exceed 12 Inserts.

SPIROL's Knurled Pins are manufactured with two different knurl types: straight knurls and helical knurls. Unlike a Straight Pin, where retention is provided by the uniform interference between the pin and hole, Knurled Pins are designed to cut into the host. The displacement of the host material into the valleys of the knurls yields more frictional contact area between the Knurled Pin and hole; thus resulting in higher retention. Solid Pins with retention features such as knurls and barbs allow for wider hole tolerances than Solid Pins without retention features (i.e. Straight Pins).

Die Edelstahl-Tauchsonde DCL 531 mit RS485-Schnittstelle benutzt das Kommunikationsprotokoll Modbus RTU, welches als offenes Protokoll Einzug in die industrielle Kommunikation gefunden hat. Das Modbus-Protokoll basiert auf einer Master-Slave-Architektur, bei der bis zu 247 Slaves von einem Master abgefragt werden können – die Daten werden in binärer Form übertragen. Basiselement ist eine hochwertige Edelstahlmesszelle, die besonders für genaue Messungen mit guter Langzeitstabilität geeignet ist. Merkmale — Nenndrücke: 0 ... 1 mH2O bis 0 ... 250 mH2O — Genauigkeit: 0,25 % FSO -Ausgangssignal: RS485 mit Modbus RTU Protokoll — Durchmesser 26,5 mm — geringer Temperaturfehler — hohe Genauigkeit — gute Langzeitstabilität — Resetfunktion Optionale Merkmale — Trinkwasserzulassung nach DVGW und KTW — verschiedene Kabel- und Dichtungsmaterialien Gehäusematerial:Edelstahl Signalausgang:Digital - Modbus RTU/RS485 Messzelle:Edelstahl

The battery-powered BAROLI 02 enables a local displaying of values, satisfying the highest demands for accuracy and long-term stability. The pressure gauge may be applied compatible with the stainless steel used; it shows an excellent robustness and a high overpressure protection. The BAROLI 02 display housing is rotatable, thus ensuring an easy reading even under unfavorable mounting conditions. Additional functions: changing the unit, displaying min / max values, calibrating of offset and the span, configuring the automatic switching-off. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.125 % FSO — stainless steel diaphragm — 2-line LC display, 4.5-digit 7-segment display, 6-digit 14-segment additional Display — mechanical connections: inch, NPT threads Optional Features: — min- / max-function with reset function — offset and end point calibration — setting the pressure unit

The SPIROL Model HA Automatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. With this exceptionally versatile machine, the operator does not need to physically touch the Insert during the entire installation process. SPIROL’s Model HA Automatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HA Automatic Heat Insert Driver installs Threaded Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads. The machine can be configured to accommodate a variety of applications and the heat tips are easily interchangeable to accommodate various sized Inserts.

The Model CLX operates the same way as SPIROL's Model CL, yet this extra-large Compression Limiter Installation Machine is custom-designed to accommodate larger assemblies outside the standard footprint of the Model CL. Visit www.SPIROL.com to learn more!

SPIROL's FH100 Headed Straight Pin has the same body style as the DP100 Straight Pin, with the addition of a head. A Headed Pin is typically used to provide a positive stop or to retain a thin component to a thicker component within an assembly. FH100 Headed Straight Pins have a flat head, however they are available to order with a round head (RH100) to meet specific application requirements. Similar to the SPIROL Series DP100 Straight Pin offering, SPIROL's Series FH100 Headed Straight Pin is available in metric diameters ranging from Ø2mm to Ø6mm and inch diameters ranging from Ø.078" (5/64) to Ø.250" (1/4).

Flexible, versatile solutions for post-mold Insert installation into thermoplastic and thermoset plastics. SPIROL's Installation Machines are the ideal foundation for stand-alone systems and enhanced assembly systems provided by SPIROL. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable — allowing simple customisation to meet the specific needs of your application. More than 80% of the components in the Insert Installation Machines we design are pre-tested and production-proven standard items. This translates into faster delivery, greater reliability, and lowest cost for Insert Installation Equipment of comparable quality. We specialize in custom application-specific part holding devices. Fixturing – holding your components accurately and firmly during insertion – is a critical element to the performance of your assembly equipment.

SPIROL specializes in the manufacture of precision machined AAR Nuts for the railroad industry. SPIROL's Railroad Nuts are held 100% square to the tap. SPIROL's thread pitch diameter allowances are engineered for ease of assembly after plating, yet manufactured to strict standards with specific gages. Each production lot has a unique identification number and is traceable through each manufacturing process back to the original raw material test certificate. SPIROL's Railroad Nuts, otherwise referred to as AAR Clamp Nuts, Binding Nuts, and Gold Test Nuts or AAR Signal Nuts are used in signal lights, crossing bells and terminal blocks.

Das DL01 ist ein Präzisionsmessgerät, welches höchsten Ansprüchen gerecht wird. Es wurde speziell für die Leckageprüfung oder Rohrnetzüberwachung konzipiert. Das DL01 kann somit schnell und problemlos binnen Sekunden auf die unterschiedlichen Montagesituationen angepasst werden ohne wie bisher eine Vielzahl von Digitalmanometern bereithalten zu müssen. Herausragende Messeigenschaften, intuitive Bedienung, sowie sein integrierter Datenlogger zeichnen das DL01 aus. Zudem unterstützt das graphische Display die Bedienung und die übersichtliche Darstellung des Mess- bzw. Prüfvorganges. Merkmale: — Nenndrücke: von 0 …100 mbar bis 0 ... 400 bar — Genauigkeit: 0,05 % FSO BFSL (Klasse 0,05) — modulares Sensorkonzept — Datenlogger — grafikfähiges Display — Edelstahlgehäuse d = 100 mm — USB 2.0 Schnittstelle Optionale Merkmale: — Datenloggerintervall 1s ... 99 Tage oder fester Zeitpunkt — Vorgabe der Mess- / Prüfdauer — Anzahl Werte oder Zeitdauer — Nullpunktjustage

Heat / Ultrasonic Inserts are designed for post-mould installation in thermoplastics. Heat and ultrasonic installation yield outstanding performance results. SPIROL offers several different series of Heat/Ultrasonic Inserts available in a long and short version of each thread size. Long lengths maximize torque and pull-out resistance, while short lengths are good for less stringent requirements at lower cost and shorter installation times. Some styles are available with or without a head. The head provides bearing surface for the mating component that also prevents jack-out (or when used in reverse, can prevent pull through). However, adding a head results in additional cost raw material of a larger diameter is required to create the head. Some non-headed Inserts are symmetrical – thus eliminating the need to orient the Insert prior to installation.

Press-In Inserts are designed to be pressed into a straight hole without melting the plastic prior to installation. Ideal for use in softer plastics, the helical knurls of the Press-In Inserts are used to provide both torque and pull-out resistance and to ensure good plastic flow as the Insert rotates into the hole. Installation torque to achieve sufficient tension between the threads is not a problem in that the helical knurls are designed so that the direction of the installation torque will have the tendency to drive the Insert into the hole — which of course is not possible — as the threaded joint is tightened. A pilot only slightly smaller than the hole and of sufficient length is designed to assure straight insertion into the hole. Press-In Inserts offer rapid installation with no specialized equipment and achieve good overall joint performance. If installation equipment is required, SPIROL also offers a standard comprehensive line of Insert Installation Equipment.

SPIROL Pin Inserters feed all common types of pins — headed or straight — as well as Bushings, Rivets, Press-In Inserts and many other similar components. Whether your requirements are for a standard Pin Inserter (with or without fixturing) or a custom designed system, our objective is to build reliable and cost effective equipment that provides the right degree of automation based on the volume and complexity of the assembly process involved; the degree of automation that yields the lowest per unit assembly cost and the optimum pay back.

Since the development of coil springs in turret tooling, engineers have been challenged to increase the productivity of turret presses even further. In a traditional press, the option of material type and material thickness is limited by the coil springs inability to produce a high force in a short linear distance. When this performance is necessary, coil springs will have a negative effect on the quality of the formed product and efficiency of the manufacturing process. SPIROL® Disc Springs are the solution to form thick materials, large extrusions, and more complex designs. When stacked in series, they are capable of providing a greater, more consistent stripping force than coil springs and require less space. They have become an instrumental component in the advancement of turret punch press tooling. Visit www.SPIROL.com to learn more!

SPIROL fabrique des goupilles élastiques spiralées en acier inoxydable 316 pour répondre aux exigences d'applications spécifiques. L'acier inoxydable de type 316 est similaire à l'acier inoxydable 302/304 avec une teneur en nickel légèrement supérieure et l'ajout de molybdène. La teneur en molybdène augmente considérablement la résistance chimique de cet alliage. L'acier 316 présente une résistance supérieure aux piqûres de l'eau de mer, des vapeurs d'acide acétique, des chlorures, des saumures de sodium et de calcium, des solutions d'hypochlorite, de l'acide phosphorique, des liqueurs de sulfite et des acides sulfureux utilisés dans l'industrie du papier et de la pâte à papier. Cet alliage est également austénitique, non magnétique et non durcissable par les méthodes conventionnelles.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

SPIROL's Series 100 Key Fob Coiled Spring Pins were designed specifically to secure the key to the fob. The advantages of these high-performance automotive key fob security pins are as follows: Increased productivity, easy and trouble-free assembly, and simplified logistics.