Termékek acélunk (230)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

External gripping single piece jaws to suit Kitgawa's SC, JN and JS Series chucks. Estimated delivery:Next Day (subject to availability)

0.5mm and Imperial Increments also Available Accurate and Durable Suitable for 1st and 2nd Operation Work Handening ensures Longevity of Collets Available in a wide range of sizes 5C collets offer the user flexibility to do both first and second operation work using the same collet style. These collets are hardened and tempured to ensure flexibility and durability. The sizes below are in 0.5mm increments but we are able to supply both imperial increments and even special sizes. Estimated delivery:Next Day (subject to availability)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Universal quick change system for any chuck Repeatability < 0.001" TIR Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems DESCRIPTION When it comes to turning/holding smaller diameter parts Abbott’s precision master plate and segment system is an ideal choice for high changeover and short running jobs. Due to the system’s high repeatability, it is an excellent alternative to more expensive quick change chucks. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is bored and bushed to accommodate Abbott’s standard, off-the-shelf pinned segments. Plates are available in 8, 10 and 12 inch diameters and can be mounted on 4-12 inch diameter chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments Estimated delivery:7-10 Working Days (subject to availability)

T-Slots to allow for Flexible use for Fixturing Products Ground Flat Five High Accuracy Location Holes Cast Iron Sub Plate to suit rotary table or indexer. T-Slot pattern to allow for easy flexible set-up of fixturing components. Ground flat with Locating Holes for precise loading and quick location. Estimated delivery:7-10 Working Days (subject to availability)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish. Estimated delivery:Next Day (subject to availability)

Maximise your machining envelope High precision and high clamping force Wide range of accessories for flexibility Clamp single large or multiple small workpieces Workstops to suit OK-Vise Multi-Rail. Multi-Rail can accommodate OK-Vise clamps, stops, parallels and other accessories to clamp multiple components and maximise your milling work area. All the clamping and location elements on the rail can be positioned according to the size and shape of the workpieces to swiftly adapt from clamping multiple small workpieces to clamping single large workpieces. These stops are available in a range of styles and applications. Estimated delivery:7-10 Working Days (subject to availability)

Basement inputs and transitions are permanent joints of polyethylene and steel pipes "polyethylene steel", intended for installation in the places where the underground pipeline exits from the ground. The permanent connection is made in a steel case to protect the basement entry from mechanical damage and prevent pipe cooling. Basement inputs are subdivided into L shaped bushings made of insulated steel pipe; bushings made by free bending of a polyethylene pipe with a polyethylene steel transition device; bushings with straight sections of insulated steel and polyethylene pipes; L shaped bushings, combined with the transition "polyethylene steel", insulated with fiberglass. You can contact us by mail - marketing@stalevar.com or by phone +380675624220.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Change jaws in seconds and complete a full setup in a few minutes Precise loction of jaws means your datum is preserved every time you remove the jaws. Once a job is setup, it stays setup. Two parts in the same space as one. Maximise your working area and optimise the toolpath. Machinable workholding means complex shaped workpieces are easy to grip Fully machinable aluminium jaws for use on either 0520 Qwik-Loks or 0520 Multi-Loks. The Dual Station Machinable Jaw Sets clamp with an equal and opposing inward force, thus eliminating the potential for jaw lift. The safe low profile jaw interface maximizes the amount of machinable area, giving the ability to hold larger parts. These jaw sets are available in standard size or oversize. An additional set of jaws can be created by purchasing an additional fixed jaw and reversing the movable jaws. All jaws are available as sets or individually. Estimated delivery:Next Day (subject to availability)

Easy machining of irregular workpieces High precision and high clamping force Wide range of accessories for flexibility Maximise your machining envelope Fixed soft jaws for the SVF range of flexible vices. There are bolt-on soft jaws to fit all types of fixed jaw in the SVF range including wedge type and non-wedge type. These soft jaws have a centre key for accurate repositioning and do not require re-skimming every time they are used. Estimated delivery:On Request

Change jaws in seconds and complete a full setup in a few minutes Precise loction of jaws means your datum is preserved every time you remove the jaws. Once a job is setup, it stays setup. Machinable workholding means complex shaped workpieces are easy to grip Single station jaws can grip larger workpieces with just a quick jaw change Single Station Machinable Jaw Sets increase the flexibility of your system by eliminating the need to completely switch fixtures for jobs requiring greater holding capacity. Simply QwikChange the jaws and the set-up is ready in minutes. These jaws are compatible with 1030 Qwik-loks and 1030 Multi-Loks and are available in a range of sizes. All jaws are available as sets or individually. Estimated delivery:Next Day (subject to availability)

High Accuracy Taper and External Diameter Wide range of Sizes Available These reduction bushes allow for the fitting of boring bars and drills with a tapered shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft. Estimated delivery:3-5 Working Days (subject to availability)

Clamps and Pulls Down Component Available Ground or Serrated Low Profile Jaw for Thinner Components Vise mounted directly to the machine bed. Low profile jaw allows for more tool clearance. The actuation not only clamps the components but also pulls it down. The jaws are available in smooth or serrated. Parts CP15 and CP16 work as stop for this vise. Estimated delivery:5-7 Working Days (subject to availability)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Reduce setup and changeover times by up to 80% Eliminate out of round conditions and concentricity problems Effectively double the holding capacity of any chuck without eliminating the ability to hold small parts Light-weight 6061 T-6 or 319 for weight saving DESCRIPTION Abbott‘s master plate and segment system is a great choice for turning larger diameter work pieces. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is pre-drilled and keyed to accommodate Abbott’s standard, off-the-shelf segment rings. Plates are available in various diameters from 15 to 60 inches and can be mounted on 8-60 inch diameter chucks, effectively increasing the holding capability of smaller chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments before continuing Estimated delivery:5-7 Working Days (subject to availability)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 8 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish Estimated delivery:Next Day (subject to availability)

The water and gas pipe (DU) is produced from hot rolled sheet metal and is necessary for the installation of water and natural gas supply pipelines for residential and non residential buildings. Due to its low cost, the pipe is in demand in everyday life, mechanical engineering and at construction sites; metal products and steel structures , machine parts and other popular materials are produced from it . The vgp pipe is easy to install, its service life is from twenty to fifty years or more (time tested). In comparison with plastic counterparts, it is an excellent heat dissipating product and is more resistant to high temperatures and loads. Pipe DN GOST 3262 75 standard sizes from 15 to 50, wall 2.5 4 mm, length 6 lm. Longitudinal electric welded pipe is necessary for the production and construction of structural products. You can contact us by mail - marketing@stalevar.com or by phone +380675624220. DN St 3, mm:15х2,5, 15х2,8, 15х3,2, 20х2,5, 20х2,8, 20х3,2, 25х2,8, 25х3,2, 25х4, 32х2,8 DN St 3, mm:32х3,2, 32х4, 40х3,0, 40х3,5, 40х4, 50х3,0, 50х3,5, 50х4 GOST 10704 10705:57х3,0, 57х3,5 [4,0-6,0], 76х3,0, 76х3,5 [4,0-6,0], 89х3,0, 89х3,5 [4,0-6,0], 102х3,0 GOST 10704 10705:102х3,5 [4,0-6,0], 108х3,0, 108х3,5, 108х4,0 [4,5-6,0], 114х3,0, 114х3,5, 114х4,0 [4,5-6,0] GOST 10704 10705:127х3,0, 127х3,5, 127х4,0 [4,5-6,0], 133х3,0, 133х3,5, 133х4,0 [4,5-6,0], 152х3 GOST 10704 10705:152х3,5, 152х4,0 [4,5-6,0], 159х3, 159х3,5, 159х4,0 [4,5-6,0], 219х5, 6, 7, 8 GOST 3262:ДУ 65х3,2 (4,0), ДУ 80х3,5 (4,0-4,5), ДУ 90х3,5 (4,0-4,5), ДУ 100х4 (4,5-5) DIN EN 10255:17,2х2,3-2,9, 21,3х2,6-3,2, 26,9х2,6-3,2, 33,7х3,2-4, 42,4х3,2-4, 48,3х3,2-4 DIN EN 10255:60,3х3,6-4,5, 76,1х3,6-4,5, 88,9х4-5, 114,3х4- Pipe GOST 10704 10705:168x2.7-8, 193.7x3-8, 219x3-9, 244x4.5-9 DIN EN 10219 10217 10240:21,3х1,2-2,8, 26,9х1,2-2,8, 33,7х1,2-3,0, 38х1,2-3,0, 40х1,2-3,0, 42,4х1,2-3,0 DIN EN 10219 10217 10240:48,3х1,2-3,5, 51х1,2-3,5, 57х1,5-3,5, 60,3х1,5-3,8, 76,1х1,5-5,5, 88,9х1,5-6, 101,6х1,5-8, 108х2-8 DIN EN 10219 10217 10240:114,3х2-8, 127х2-8, 133х2,7-8, 168,3х2,7-8, 193,7х3-8, 219,1х3-9, 244,5х4,5-9 GOST 10704 10705:273х5-10, 325х6-10, 377х6-10, 426х6-12, 530х7-25, 610х8-26, 630х8-26, 720х7-30, 7628-26, 820х8-30 GOST 10704 10705:914х10-30, 920х10-30, 1020х10-33, 1067х11-33, 1219х13-35, 1220х13-35, 1420х13-35, 1422х13-35

Hardened and Ground Supplied in sets of 3 Ground Serrations for Accurate Positioning of top Jaws Set of three replacement base jaws. Base jaws are normally replaced in the event of a crash. Please check the condition of slide ways in the chuck before replacing. Replacement of base jaws will not necessarily increase accuracy. Any damage or wear to the chuck body itself cannot be rectified. Estimated delivery:2-3 Weeks (subject to availability)

A Chick Workholding Foundation Plate is tailored to fit the machine’s specifications. A standard grid pattern to simplify designing, cataloguing and utilisation of fixtures, providing consistency and repeatability to set-ups. Length and width tailored to the machine’s work envelope. Precision ground cast iron to 35mm thick. 50mm spaced holes, drilled and tapped, for use as both location and hold down. Sealed with chip plugs. An alpha-numeric labelling system. Minimises set up time from workholding system to system. Machine interface mounting holes, customised for each machining centre.

Buy Pure Copper Wire Scrap with a 99.8% copper content. We offer high-quality copper wire scrap for purchase. Our scrap is of the highest purity and is perfect for a variety of applications. Contact us today to get the best deals and prices. Overview Essential details Place of Origin: Germany / Netherlands Brand Name: CRX Model Number: Copper Wire Type: Copper Wire Copper Content: 99.99% Product Name: Pure Copper Wire Scrap 99.8% Copper Keyword: Copper Scrap / Copper Wire For Sale MOQ: 1 Ton Material: 99.995% Pure Copper Shape: Bare Wire Package: Customers' Request Delivery Time: 7-14 Days Wire Diameter: 0.2~3MM Length: Customized Length Supply Ability Supply Ability: 500 Ton/Tons per Week Packaging & delivery Packaging Details: AS BUYER REQUEST Port: USA Lead time 1 - 100 metric tons : 5 days Above 100 metric tons : To be negotiated

Material can be Case Hardened Wide range of Heights and Lengths Custom Jaws also Available Steel serrated soft jaws to suit a 5 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish. Estimated delivery:Next Day (subject to availability)

1/8" Range per Collets Sizes Up To 50.8mm Across Flats Smooth Bore as Standard, Other Finishes Available Special Profiles Available DESCRIPTION D120 Varibore hex collets are to suit 54mm capacity collet chucks. Also known as V120, these collets have a 3.175mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D120 suit the following collet chucks: Klamp CRL54 Klamp CRS54 Klamp QCRL54 Crawford CDC54 Crawford CDC-54-S Crawford QC-54 Estimated delivery:2-3 Weeks (subject to availability)