Termékek acélunk (563)

CNC- Drehbank Leadwell mit einer Kapazität bis zu einer Länge von 500 mm und einem Durchmesser von Ø300 mm. Kleine und mittlere Serien (Einheiten von 1, 10, 100, 1.000, 5.000 und 10.000 St.)

Están hechos de un material cerámico fundido a base de circonio. Las perlas de cerámica (Esferas de Circonio) tienen una densidad más alta que las microperlas de vidrio, que pueden lograr una mayor eficiencia de procesamiento. Tienen una densidad menor que la granalla de acero, lo que permite el ahorro energético y la conservación de las piezas a tratar. Dureza: 7-7,5 mohs Forma: esférica Densidad: 3,8 g / cm3

Product based on resin (melamine), then granulated and classified into different sizes. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 4 mohs Shape: angular Density: 1.45 - 1.52 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Synthetic mineral abrasive of angular particles, free of free silica, extremely hard and with good toughness. Hardness: 7 mohs Shape: angular Density: 3.7 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

This shot comes from cutting AISI304 stainless steel cut wire. Depending on the characteristics of the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 40-55 HRC Shape: cylindrical or spherical (G1, G2 or G3) Density: 7.8 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

It is suitable for more aggressive cleaning operations. It is available in three types of hardness. Hardness: 40-61 HRC Shape: angular Density: 7.8 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

CNC-Frästeile aus Stahl

Producto a base de resina (melamina), luego granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 4 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

Natural garnet sand is a non-active mineral abrasive which does not cause silicosis. It has high performance, ensuring efficiency and economical process with medium oxidation level. Its grains are microcrystalline, with more or less irregular rounded shapes. Hardness: 6-7.5 mohs Shape: irregular Density: 3.5-4.3 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Cette grenaille à haute dureté est particulièrement adaptée au grenaillage de surfaces métalliques dans les systèmes à air comprimé. Dureté: 57-67 HRC Forme: angulaire Densité: 7 g / cm3

Le sable grenat naturel est un abrasif minéral, non actif, qui ne provoque pas de silicose. Il a une haute performance, garantissant une efficacité et un processus économique avec un niveau d'oxydation moyen. Ses grains sont microcristallins, avec des formes arrondies plus ou moins irrégulières. Dureté: 6-7,5 mohs Forme: irrégulière Densité: 3,5-4,3 g / cm3

Wir sind seit 2011 durch die SGS gemaess der ISO 9001 zertifiziert

Esta granalha é proveniente do corte de arame. Dependendo da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:44 - 56 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,4 g/cm3

La arena granate natural es un abrasivo mineral inactivo que no produce silicosis. Tiene un alto rendimiento, asegurando eficiencia y un proceso económico con un nivel de oxidación medio. Sus granos son microcristalinos, con formas redondeadas más o menos irregulares. Dureza: 6-7,5 mohs Forma: irregular Densidad: 3,5-4,3 g / cm3

This shot comes from cutting the wire. Depending on the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 44-56 HRC Shape: cylindrical or spherical (G1, G2 or G3) Density: 7.4 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Esta granalha é proveniente do corte de arame de inox AISI304. Dependendo das características da matéria-prima usada, são obtidas diferentes durezas, sendo possível o fornecimento de diferentes esfericidades (G1, G2 e G3). > Aplicação industrial de abrasivos > Bem-Vindo à BLASQEM! O seu Especialista em Granalhas, Abrasivos e Equipamentos. Dureza:40 - 55 HRC Forma:cilíndrica ou esférica (G1,G2 ou G3) Densidade:7,8 g/cm3

Fabriqué à partir de résine (polycarbonate), granulée et classée en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 120 HRR Forme: angulaire Densité: 1,20 g / cm3

Stainless steel chrome shot is more economical than chrome nickel; it has been specially developed for cleaning operations requiring less gloss or corrosion resistance. Hardness: ± 50 HRC Shape: irregular Density: 7.9 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

CNC Stainless steel milled parts

This shot is produced by cutting zinc or zinc / aluminum wire. Depending on the characteristics of the raw material used, different hardnesses are obtained, making it possible to provide different sphericity (G1, G2 and G3). Hardness: 30-55 HV0.1 Shape: cylindrical or spherical (G1, G2 or G3) Density: 6.7 - 7.5 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Produced from resin (acrylic), granulated and classified in different dimensions. This abrasive cleans surfaces without causing roughness or dimensional alteration of the parts. Hardness: 3.5 mohs Shape: angular Density: 1.10 - 1.20 g / cm3 Quality: MIL-P-85891 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Producido a partir de resina (urea), granulado y clasificado en diferentes tamaños. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,45 - 1,52 g / cm3 Calidad: MIL-P-85891

Producida a partir de resina (acrílica), granulada y clasificada en diferentes dimensiones. Este abrasivo limpia superficies sin provocar asperezas ni alteración dimensional de las piezas. Dureza: 3,5 mohs Forma: angular Densidad: 1,10 - 1,20 g / cm3 Calidad: MIL-P-85891

Granalla de Inoxidable Cr/Ni : el grano de cromo-níquel es un producto de alta calidad, utilizado en situaciones de alta demanda de protección contra la corrosión y brillo superficial, garantizando una larga duración en todas las operaciones de limpieza, con un producto no oxidante. Dureza: 7-7,5 mohs Forma: esférica Densidad: 3,8 g / cm3

Granalla de Acero : es adecuado para operaciones de limpieza más agresivas. Está disponible en tres tipos de dureza. Dureza: 40-61 HRC Forma: angular Densidad: 7,8 g / cm3

Chromium-nickel grain is a high quality product, used in situations of high demand for corrosion protection and surface shine, guaranteeing a long duration in all cleaning operations, with a non-oxidizing product. Hardness: 7 - 7.5 mohs Shape: spherical Density: 3.8 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Abrasif minéral synthétique de particules angulaires, sans silice libre. C'est un abrasif avec moins d'impact environnemental que le silicate de fer, car il contient un faible pourcentage de métaux lourds. Il permet d'obtenir des surfaces plus propres et une productivité élevée grâce à sa densité plus faible. Dureté: 6 mohs Forme: angulaire Densité: 2,4-2,6 g / cm3

Carboclean is a calcium carbonate, of very low hardness and high whiteness, suitable for dry and wet pickling, without damaging the treated surface. Hardness: 2.5 - 3 mohs Form: sub-angular Density: 2.5 g / cm3 Welcome to BLASQEM, your Specialist in Shots, Abrasives and Equipment: - Abrasive Products and Accessories - Abrasive steel shots - Abrasives manufacturer - Abrasives solutions - Blasting material - Metallic shots and organic media or glass sandblasting and aluminium oxide or carbon grit abrasive shots for shot blasting - Steel Abrasives and aluminium shot for shot blasting operations - Blasqem is the industry's leading supplier of industrial abrasive

Produits à partir de différentes résines, granulées et classés en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 3,0 - 4,0 mohs Forme: angulaire Densité: 1,45 - 1,52 g / cm3 Qualité: industrielle

Su dureza y forma esférica permiten un acabado limpio, brillante y satinado, sin cambiar las dimensiones de las piezas. Las microesferas de vidrio no generan oxidación en las superficies tratadas, ya que es un vidrio que no reacciona químicamente con otras sustancias. Dureza: 6 mohs Forma: esférica Densidad: 2,5 g / cm3