Termékek olapl (90)

5-spaces grounded-based bike rack in galvanized steel, silver color abd black pvc caps. dimensions: 138 x 42 cm h. 38 cm SKU:Art-1005 EC-B Weight:7 kg Dimensions:147 × 43 × 41 cm

5 spaces grounded-based bike rack in a cold-dip galvanized steel, silver color with black PVC caps. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes. Bike rank system high and low in order to avoid handlebars to get wedged each other with mounting bracket for floor anchoring. Size:140 x 42 cm h 41 cm SKU:Art. 1205 B Weight:9 kg Dimensions :147 × 43 × 41 cm

Basic plastic pump, central steel tube SKU:Art. Pompa/Plasti/Bianca P 600 Size:35 x 35 cm h. 25 cm

Intosana Premixed, fibre-reinforced, breathable plaster, based on hydraulic lime, for coating and repairing internal and external walls and masonry, for new buildings, existing buildings, ecological building interventions, in new buildings and in the restoration of vintage buildings and monuments. Intosana is a product made up of hydraulic lime, metakaolin, light aggregates, siliceous aggregates, Vichy salt and special mineral additions with pozzolanic activity. These light-coloured pozzolanic materials, substantially consisting of kaolins of very fine particle size, increase the mechanical performance of the plaster and have very positive effects on its durability, preventing the development of undesired reactions between the hydraulic binders and the salt compounds that are usually present in the masonry (sulphates), or they can come from particularly aggressive exposure environments (chlorides, nitrates). Intosana has been specially formulated to have low water absorption values and very high water vapour breathability at the same time, in addition to a lower density compared to traditional plasters. The particular balance between breathability, absorption, mechanical performance, durability, resistance to chemical attacks, makes the use of Intosana particularly recommended on: buildings attacked by marine aerosol; urban environments attacked by acid rain; damp walls. Intosana does not contain portland cements, resins, solvents and radioemissive elements. Plastering and repair of internal and external masonry, brick, stone or mixed. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, and gradually add Intosana and the water still required, continue to mix until a homogeneous lump-free mixture of the desired consistency is obtained. The mixing water indicatively necessary is equal to 16-18% by weight (4-4.5 litres per 25 kg bag). Apply by hand, with brick trowel and plaster trowel, or with plastering machine (PFT model G4 or similar). It is advisable to apply the plaster after application of a suitable adhesive rendering. The rendering can be realised with Intosana slightly more liquid than normal, or by application of the specific product Untersana. They must both be applied by "spraying", and they must provide a rough, corrugated surface, designed to promote the bonding of the subsequent plaster, which must be applied no later than 2-3 days. For thicknesses in excess of 20 mm improve the anti-cracking attitude, by inserting fibreglass plaster-holding. Approximately 15 kg/m² of Intosana for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

Roll leggero e versatile per lo stoccaggio e il trasporto delle vostre merci. La base in plastica è rinforzata con delle lame metalliche per una maggiore resistenza. COD:ROLL0035 Peso:21 kg Dimensioni esterne:720 x 810 x h. selezionata Capacità interna:2 sponde: 660 x 800 x h. selezionata, 3 sponde: 660 x 780 x h. selezionata, 4 sponde: 660 x 750 x h. Caratteristiche:Antello lato corto Impieghi:GDO e Punto vendita, Industria, Lavanderie, Rifiuti, Riciclo, Trasporto, Movimentazione interna Famiglia:Roll Container Zincatura:Elettrolitica Biancazzurra (su richiesta tropicalizzata gialla) Maglia della rete:105/155 x 380/395 mm Ottimizza la spedizione:Un collo ha 5 pezzi

TIPPING BUCKET FOR MOVING SAND OR SNOW New bucket made with sturdy steel structure and high load capacity which makes it suitable for handling materials such as rubble, earth, sand, gravel, snow, fertilizers, grains etc., using a forklift. The automatic tipping is practical and safe, in fact, without getting off the elevator, the operator can operate the spring release system using a practical rope. TECHNICAL FEATURES: - Thick blade, welded on the bottom - Sturdy shovels for forking by forklift or vehicles equipped with forks - Two spring clips to cushion strong blows during unloading - Two-component acrylic water-based painting Red Ral 3000 FEATURES:MODEL 310 Capacity:500 liters Max load:Kg. 900 Dimensions (L x P2 x P1 x H):mm. 1200x950x1450x700 Tare:Kg. 170 Full load weight:Kg. 1070

5 spaces ground-based bike rack in galvanized steel, silver colour with caps and mounting bracket for floor anchoring. Size:140 x 42 cm h 40 cm SKU:Art-1005 B Weight:9 kg Dimensions :147 × 43 × 41 cm

Le gocce orali rappresentano una forma farmaceutica versatile e altamente assorbibile, ideale per chi cerca un dosaggio personalizzabile e un rapido assorbimento dei nutrienti. Questa tipologia di integratori è particolarmente adatta per chi ha difficoltà a deglutire le pillole, offrendo un'alternativa pratica e efficace. Le gocce sono prodotte in flaconi di diverse dimensioni, tra 5 e 30 ml, in materiale PET o vetro, garantendo una scelta flessibile del packaging. La produzione richiede un tempo di consegna di otto settimane, assicurando una disponibilità costante per i rivenditori. Le materie prime utilizzate includono estratti vegetali fluidi, fermenti lattici, lattoferrina e colostro, insieme a una varietà di aromi naturali e artificiali. Questo mix di ingredienti assicura che le gocce siano non solo efficaci, ma anche piacevoli da consumare. Gli integratori in forma di gocce sono ideali per chi cerca un prodotto che offra un dosaggio flessibile e un rapido assorbimento dei nutrienti.

Powder preparation, ready-to-use, based on hydraulic lime, for the preparation, with the sole addition of water, of grout for masonry reinforcement, injectable and castable, high performance in terms of sliding, strength and stability, for ecological building interventions and the restoration of vintage buildings and monuments. In the Sanafluens mixtures, the water is completely and stably incorporated from the hydration reaction of lime; conversely, in traditional mixtures, a very high part of added water, is free, and evapourating, it leaves gaps in the walls. Sanafluens is based on natural hydraulic lime, sodium gluconate, kaolin, aluminates; it does not contain cement, resins, solvents and radioemissive aggregates. Consolidation through injections of brick, stone or mixed masonry, "bag" structures, masonry damaged by the earthquake. Consolidation of masonry affected by capillary rising damp and soluble salts. Consolidation of plasters detached from the masonry support, even with frescoes or of historical and artistic value. Consolidation of foundation structures, pillars, vaults and arches. Clean the application surfaces by spraying abundantly with water. If there is a lack of plaster, apply a suitable render of hydraulic lime and sand (such as Untersana) to close as much as possible the escape routes of the grout once it has been injected. Trace, from bottom to top and from left to right, a 50 cm square grid. On the intersection of the squares, drill the masonry with a rotary drill, with a bit of suitable diameter (depending on the type of masonry to be injected; diameter usually between 12 and 24 mm), to a depth of at least 3/5 of its thickness, tilting the drill downwards by about 10 - 20°. Once all the holes have been drilled, they will be sucked up, blown with compressed air and sprayed with water, to remove the dust inside them produced by the drilling. Insert in the holes for a depth of about 5 cm, transparent meshed rubber tubes, with a total length of at least 30 cm (therefore with about 25 cm external). Properly seal the perimeter of the pipe with Anchorsana Fix accelerated setting grouting mortar to prevent the injected product from escaping. Inject the grout always keeping it lightly mixed and operating a continuous flow, without interruptions. Pour about 2/3 of the mixing water into the mixer. Gradually add Sanafluens and the water still required, continue to mix until a fluid, homogeneous, lump-free grout of the desired consistency is obtained. The mixing water indicatively necessary is equal to 22-24% by weight (5.5 - 6 litres per bag). Reinforcing backfills and fills can be carried out both by gravity and using manual or automatic pumps, depending on the type of application. To verify the effectiveness of the reinforcement, the grout will come out of the pipes adjacent to that in which it is injected. Approximately 1500 kg of Sanafluens for each cubic metre of volume to be filled.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake Description:Tiltable bucket 1000 liters Dimensions (mm) LxWxH:1190x1650x1080 Load:Kg. 800 Capacity:1000 Lt.

Le bottiglie con rubinetto dosatore offrono un modo innovativo e preciso per assumere integratori alimentari liquidi. Questo sistema di dosaggio consente di misurare esattamente la quantità di liquido da assumere, garantendo un'integrazione accurata e personalizzata. Ideali per chi desidera un controllo preciso sulla propria integrazione, queste bottiglie sono una scelta pratica e moderna.

Sanaxil I Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mold plaster, with stabilized potassium silicates, for interiors and exteriors. Substantially mineral formulation which, thanks to the natural alkaline pH of potassium silicate, develops a strong antibacterial and anti-mold action. Sanaxil I is a versatile and valid product in various application fields: in green building interventions, in new constructions and in the restoration of period and monumental buildings. The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement. Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Existing paints (washable, organic, solvent-based etc.) must be removed. Homogenise the surfaces by applying the fixative Sanaxil Fix. Spread SANAXIL in two coats: the first, for simple deposition, with steel trowel, the second, for spreading and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, under one of two suggested conditions: with dry trowel, for smooth surfaces; with moistened trowel, for antique-effect surfaces. Sanaxil I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours. Indicative consumption depending on the different particle sizes of Sanaxil I available: 1 mm GRAIN: approximately 1.25 -1.40 kg/m²; 1.2 mm GRAIN: approximately 1.40 -1.55 kg/m²; 2 mm GRAIN: approximately 1.85 -2.15 kg/m²; 2.2 mm GRAIN: approximately 2.00 -2.30 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 5 kg - Pail 25 kg

Sanafarbe I Natural, protective, decorative, breathable, pigmented, non-toxic putty coat, naturally mildewcide, based on hardened lime putty and botticino marble dust, for indoors and outdoors. Formulation prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. SANAFARBE putty coat has a high breathability, a remarkable mildewcide and antibacterial capacity. It has no solvents, thinners, harmful substances in general. Embodiment of putty coat finishing, protective and decorative, internal and external masonry building, in ecological building interventions and in the restoration of vintage buildings and monuments. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. Spread Sanafarbe I, into two coats: the first, by simple deposition, with steel trowel, the second for laying and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, in one of two conditions suggested: with dry trowel, for smooth surfaces, with moistened trowel, for antique-effect surfaces. SANAFARBE-I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours. Indicative consumption depending on the different particle sizes of Sanafarbe I available: 1 mm GRAIN: approximately 1.6 -1.8 kg/m²; 1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²; 2 mm GRAIN: approximately 2.4 -2.8 kg/m²; 2.2 mm GRAIN: approximately 2.6 -3.0 kg/m². The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test. Pail 5 kg - Pail 25 kg

BASE CARTON SEALER B52/B670/B820 Base for the closure of only the funds of boxes by means self-adhesive tape. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. The taping bases can be used both in semi-automatic lines with operator and in automatic lines or with box formers. The GEM B52 model is available in the version without guards for semi-automatic use or with side guards for insertion in the line. On the other hand, the B670F and B820F versions are only available with side protections for use in automatic lines or in combination with an automatic box former. The GEM B52 models can also be made of stainless steel. Example model:GEM B52 Boxes width min.:100 mm with 50 mm head/150 mm with 75 mm head Boxes width miax.:500 mm Boxes length:Min. 150 mm - max. unlimited Boxes height:Min. 100 mm - max. 500 mm Tape width:50 mm (75 optional)

Syntech Pavidamp A three-component formulation, with a fluid epoxy resin base in aqueous emulsion (A + B) to be mixed with the third component (C) consisting of white cement and micro-quartz, specially designed to be used as a primer for cementitious surfaces in the presence of humidity and in conditions of hydraulic counter-thrust. Generally referred to as “wet-bonding”, it is particularly suitable as an anti-humidity barrier for the subsequent laying of parquet. Building connection layers and smoothing cement surfaces; bottom layers for resinous coatings of floorings in the presence of damp subbases; anti-humidity barriers in concrete, brick and stone masonry; surfacings of porosity, cracks and superficial irregularities. As protection from rising damp for bases where operations with polyurea resins SYNTECH POLYUREA will be carried out. The support on which the resin system is to be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilatations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. Apply by roller, brush or spray from 150 to 200 g / m2 of Syntech Primer EP-W to consolidate the substrate and facilitate the adhesion of the subsequent coating. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Prepare the mixture of the 2 liquid components (A+B), pouring the contents of the component B in the container of the component A. Mix with drill for about 2 minutes. Add the pre-dosed hydraulic binder (high resistance white cement) to the mixture A+B, and mix with a mixer drill. To disperse the product optimally, pour the powders (component C) a little at a time, continuing to stir with drill, until a homogeneous lump-free mixture is obtained. If it is used as a base: dilute with 10-15% by weight of clean, soft water and apply with a roller or brush. Indicative consumption: 0.4-0.5 kg/m² on regular supports, 0.7-0.9 kg/m² on irregular supports. If it is used for fine finishing coats: load the system A+B+C diluted with 10-15% of fresh clean water, with 60-70% spheroidal quartz (0.04-0.25 mm). Apply with steel trowel or plastering trowel. Indicative consumption: 1-2 kg/m². If it is used for medium finishing coats: load the system A+B+C diluted with 10-15% of fresh clean water, with 70-80% spheroidal quartz (0.1-0.5 mm). Apply with steel trowel or plastering trowel. Indicative consumption: 3-4 kg/m². From 0.50 to 0.60 kg of SYNTYECH PAVIDAMP for each square metre of surface to be covered. Pail 3.8 kg [A] - Pail 1.2 kg [B] - Pail 5 kg [C] - Kit: 1 Pail 3.8 kg [A] + 1 Pail 1.2 kg [B] + 1 Pail 5 kg [C]

Gli integratori alimentari liquidi in spray offrono un metodo di somministrazione rapido ed efficace, ideale per chi cerca un assorbimento immediato dei nutrienti. Questa forma farmaceutica è progettata per garantire che i principi attivi raggiungano rapidamente l'organismo o l'area trattata, prolungando la loro azione nel tempo. Gli spray sono prodotti in flaconi di diverse dimensioni, tra 5 e 30 ml, in materiale PET o vetro, offrendo flessibilità nella scelta del packaging. La produzione richiede un tempo di consegna di otto settimane, garantendo una disponibilità costante per i rivenditori. Le materie prime utilizzate includono estratti vegetali fluidi, vitamine, fermenti lattici, lattoferrina e colostro, insieme a una varietà di aromi naturali e artificiali. Questo mix di ingredienti assicura che gli spray siano non solo efficaci, ma anche piacevoli da utilizzare. Gli integratori in forma di spray sono ideali per chi cerca un prodotto che offra un assorbimento rapido e un'azione prolungata dei nutrienti.

Gli spray integratori alimentari offrono un modo rapido e conveniente per integrare la dieta con nutrienti essenziali. Questo formato innovativo consente un'assunzione diretta e veloce, ideale per chi ha uno stile di vita attivo e necessita di un'integrazione immediata. Gli spray sono facili da trasportare e utilizzare, rendendoli una scelta popolare per chi è sempre in movimento.

Gemini: technology and personalization. The multi- layer in resin-coated beech wood frame create elegant finiture. The slats support and the TSS increase the beauty of this bed frame. All the slats support can be regulate in two different firmness. In the shoulder area and back zone of the bed, the TSS allow 360° oscillation and an indipendent effect for each single element. Many slast are covered by melamine paper and their particular texture results in less conctact between the mattress and the slats, increasing ventilation. he shoulder and back area is equipped with TSS, an independent and adjustable suspensions system that allow you to customize the rigidity and to follow the need of the body. Firmness adjustment: In the lumbar region the bed frame is made with a special system of double slats and slider that work to regulate the hardness.

Pump plastic base, central steel tube SKU:Art Pump/Plasti/White L500 Size:35 x 35 cm h. 25 cm Weight:1,5 kg

Sanatigh This macroporous, breathable, dehumidifying, fibre-reinforced plaster, with a base of natural hydraulic lime NHL 3.5, is for the dehumidification and hygrometric restoration of buildings and masonry, in works on green buildings, for new constructions and in the restoration of historic and monumental buildings. Sanatigh is a product consisting of hydraulic lime, botticino, kaolin, very fine calcium, expanded lightweight aggregates of volcanic origin, fiber-reinforced with special glass microfibres and fibers Readymesh PM 060. It has high hygroscopicity and breathability, contains no cements, resins, solvents and radioemissive substances. It has strong dehumidifying capacities and, thanks to the total absence of cement, is perfectly compatible with all types of masonry and especially with the historical walls and in all the interventions designed according to the canons of green building. Breathable dehumidifying plastering for wall bodies. Removal of crumbling plaster, if present, up to a maximum height of about 1 metre, with respect to the line of persistent humidity; wall bodies of application must in any case be clean, intact, dust-free, fouling, crumbling and non-adhering parts, conveniently saturated with water until they reach the condition of "saturated with dry surface". In the presence of salt efflorescence it will be necessary to ensure it is carefully removed by applying packs of the specific detergent and saline converter Deterg-A, in solution with water of 1:4. To prevent any new spills of salts, use specific universal anti-saline treatments in aqueous solution, Sanareg, for humid surfaces, or solvent-based, FEST SALZ, for cohesive saline concretions but with perfectly dry surfaces. PREPARATION OF THE WALL SURFACE • Remove all inconsistent, friable and rotten material, and grouting from joints, paying utmost attention where they are particularly friable or inconsistent (see also the paragraph on PREPARING SUPPORTS). • In case of strong salt concentrations, read the paragraph on PREPARING SUPPORTS. ROUGH COAT The sprayed rough coat must create a rough, corrugated surface to facilitate the adhesion of the following plaster, which must be applied promptly; within 1 - 2 days from the application of the rough coat. This adhesion spray must be applied with a low thickness (of a few millimetres) using a plastic-fluid consistency, and can be applied with the same Sanatigh product mixed with about 20% water. In case of particularly deteriorated masonry, it is recommended to use a specific Untersana product to make the rough coat. PLASTER The following application of Sanatigh must be made before the complete hardening of the rough coat (within 24-48 hours if the rough coat is made with Sanatigh, and 12-24 hours if made with Untersana). Put about 2/3 of the mixing water into the mixer, and then gradually add Sanatigh and the remaining water, continuing to mix into a homogeneous, lump-free mixture of the desired consistency for trowel or plastering machine application. Indicatively, the necessary mixing water is 16-18% by weight (i.e. 4 - 4.5 litres per 25 kg bag). Application can be performed by manual (trowel, plastering trowel) or mechanical spray methods. In case of application with a plastering machine, in order to allow adequate and homogeneous product mixing, it is recommended to not use machines with a continuous cycle, and to adjust nozzle, air and spray power in order to softly and lightly apply the product without excessive compaction. SKIMMING Levelling of plastered surfaces with Sanastof: green-construction fine, highly breathable mortar, natural hydraulic lime based with special, light, spherical micro-aggregates and high strength microfiber Readymesh PM 060. Protect surfaces from fresh direct exposure to sunlight, from the rain and wind. Cure the prolonged moist hardening. For thicknesses in excess of the 2 cm, and to improve the anti-cracking potential, provide for inserting a suitable reinforcement plaster-holding mesh: ARMAGLASS 140 o, recommended, a galvanized steel wire mesh with 2mm diameter, mesh 5x5 cm. Approximately 13 kg/m² of Sanatigh for every centimetre of thickness to be implemented (minimum thickness 2 cm = 26 kg/m²). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Sanafirm Adhesive, thixotropic, reinforced fibre compound, based on hydraulic lime, reinforced fibre, fast-curing, for fastening and anchorage, of wall bodies, structures, inserts, plates, frames, bars, sanitary, etc., in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Sanafirm consists of hydraulic lime, botticino, quartz sands, kaolin, aluminates and natural fibres. It does not contain cement, resins, solvents and radioemissive elements. Fixing and anchoring, in wall bodies, plates, door and window frames, washbasins and sanitary ware in general, bars, clamps, connectors, and metal inserts etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Sanafirm and the water still required, continue to mix until a homogeneous lump-free mixture of the desired consistency is obtained. Apply with brick trowel or filling knife. The mixing water indicatively necessary is equal to 15-16% by weight (3.5 -4 litres per bag 25kg). Approximately 1.6 kg of Sanafirm for each cubic decimetre of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

4-sided removable cover in Resistant hypoallergenic fabric allows a regenerating rest thanks to the soft padding. The 3D breathable perimeter band increases the breathability of the mattress. Highly breathable Super Fresh layer that ensures a fresh feeling together with complete ergonomic comfort. 3 supporting layers of HR Foam, open-cell water-based foam, a highly resilient and highly elastic material. This product is breathable, environmentally friendly and non-deformable. Soft hypoallergenic fibre on both sides and 3D fabric perimeter band for better air exchange.

Leo represents absolute excellence in the bed sector, because it unites all the new trends into a single product. All the materials used for construction are of the highest quality and durable over time: starting from the sturdy frame in resin-coated multi-layer beech wood, to the slat supports in TPEE, a latest generation material also used in the automotive and aerospace sectors. The shoulder area is equipped with TSS, an independent and adjustable suspensions system that allow you to customize the rigidity and to follow the need of the body. Elongated slats support: The tilting flexor joints, helps all the slats to ensure a ideal springing, interacting actively to solicitations of the mattress. Custom end slat: The slats at the of the bed frame are specially shaped for a better acceptance of the mattress. Crosspieces for feet: the feet are fixed to the bed frame using a special crosspieces that works also as stabilizer support.

Semilavorato a base di lievito naturale che consente, in un’unica soluzione, di sostituire il lievito fresco, i miglioratori e le paste acide. Formato:1 kg Dosaggio:4%

Basic steel pump, central steel tube SKU:Art. Pump/Acc/Bianca 400 Size:35 x 35 cm h. 25 cm

3 spaces grounded-based bike rack in galvanized steel, silver color with black pvc caps. Bike rank system high and low in order to avoid handlebars to get wedged each other. dimensions: 77 x 42 cm h. 40 cm SKU:Art -1003 B Weight:5 kg Dimensions:80 × 43 × 42 cm

One space grounded-based bike rack in cold-dip galvanized steel, silver color with black PVC caps. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes. To this bike rank is possible to be added art. 1201 AB-B or art. 1201 AB-TR-B to get more racks in less space. One space ground based matchable bike rack in galvanized steel, silver color with black pvc caps. Upper curve is a patented design by ANDRYS srl to set even the disk brake bikes. To this bike rank is possible to be added art. 1201 ab. to get more racks in less space. dimensions : 38.5 x 42 cm h. 26 cm SKU:Art. 1201 AB-B Weight:2 kg Dimensions:41 × 41 × 33 cm

Roll leggero e versatile per lo stoccaggio e il trasporto delle vostre merci. Le sponde laterali con tubo maggiorato Ø25 mm assicurano una elevata robustezza. Il prodotto comprende due cinghie elastiche per affrancare il carico e una targhetta metallica su ciascuna sponda per applicare le vostre etichette. La base in plastica è rinforzata con delle lame metalliche per una maggiore resistenza. COD:ROLL0020 Peso:23 kg Dimensioni esterne:720 x 810 x h. selezionata Capacità interna:2 sponde: 640 x 810 x h. selezionata, 3 sponde: 640 x 780 x h. selezionata, 4 sponde: 640 x 750 x h. Caratteristiche:Antello lato corto Impieghi:GDO e Punto vendita, Industria, Lavanderie, Rifiuti, Riciclo, Trasporto, Movimentazione interna Famiglia:Roll Container Zincatura:Elettrolitica Biancazzurra (su richiesta tropicalizzata gialla) Maglia della rete:105/155 x 380/395 mm Ottimizza la spedizione:Un collo ha 5 pezzi

Sanaxil Fix Reinforcing, fixative, transparent primer, based on stabilised potassium silicate for the preliminary treatment of the surfaces to be painted and/or plastered with silicate-based, lime putty, systems, for ecological building interventions, new buildings and for the restoration of vintage buildings and monuments. Sanaxil Fix is a product consisting of potassium silicates. It is highly breathable and is not subject to thermoplastic effects. It does not contain resins, solvents, thinners and harmful or toxic emanations. Free of V.O.C. "Priming" fixative treatment of coatings, paints or putty coat based on lime putty, potassium silicate and siloxanes in general. Dust-proofing, reinforcing, cortical treatment for surfaces of pulverising plaster. Organic type paints (washable, solvent-based etc.) where present, must be thoroughly removed. The support should, in any case, be, clean, homogeneous, compact, dust-free. SANAXIL-FIX can be applied to substrates in masonry, on cement surfaces, lime-based surfaces, on well anchored mineral paints. They can be applied by brush, roller or spray: the number of coats required and the most appropriate dilution ratio with water will be determined as a function of the absorption conditions and degradation of the support. The admissible dilution range provides for additions of water up to a maximum ratio of 1:1. Apply from 0.10 to 0.15 litres of Sanaxil Fix per square metre of surface to be treated. Plastic can 5 l - Plastic can 20 l

Lacca ecologica senza gas per un fissaggio medio. Formulata con eccellenti resine polimeriche, fissa e sostiene dando uno splendido effetto naturale e lasciando i capelli luminosi e brillanti. Grazie alla sua formulazione, miscela di ingredienti naturali accuratamente selezionati, sostiene l’acconciatura senza lasciare residui e senza appesantire i capelli. In modo particolare: Olio Essenziale di Eucalipto: permette di avere un’azione deodorante, tonificante, astringente e antinfiammatoria. Olio Essenziale di Limone: ha proprietà antibatteriche, svolgendo nel contempo un’azione disciplinante e antisettica. Flacone:250 ml