Termékek orvosi (205)

this peek can be moved according to the shape of the spine.

Doratek Titanium, Peek & Knotless Suture Anchor Systems Fully Threaded Titanium Anchor That Maximize Fixation Simplify Arthroscopic Glenohumeral Joint Instability Repair Increases The Precision of The Final Construct

Doratek Titanium, Peek & Knotless Suture Anchor Systems Fully Threaded Titanium Anchor That Maximize Fixation Simplify Arthroscopic Glenohumeral Joint Instability Repair Increases The Precision of The Final Construct

4A Bowie Dick Test Packs are the testing packages that should be used before starting daily machine sterilization process for steam sterilization devices. Bowie Dick Test Pack is used for the purpose of testing whether there is air leakage and efficient steam penetration in the steam sterilizers. 4A Bowie Dick Test Packs color change allows assurance of whether the steam sterilizers are ready for the sterilization or not. Different kinds od Bowie Dick Test Packs are available in 4A production. These are 4A Bowie Dick Test Pack 200 (wrapped in medical paper, wrapped in crepe paper and BD in box) and 4A Bowie Dick Test Pack 400 (wrapped in medical paper and wrapped in crepe paper) and 4A Bowie Dick Test Pack EWS (Early Warning Test Sheet) Note: Products can be produced with your trademark

4A Sterilization Reels provide sterile storage in packages and keep package sterile for 6 months and do not permit microorganisms to enter inside the package after sterilization cycle. The process indicators that are printed on the side of the Sterilization Reels are water based and conforms with ISO 11140. 4A Sterilization Reels are used for steam, ethylene oxide, formaldehyde sterilization methods. The sterilization conditions should be determined by the end user regarding to material to be sterilized. 4A Sterilization Reels meet ISO 11607 standards and they are manifactured using state-of-art technology with the highest quality. 4A Sterilization Flat Reels can be produced from medical paper as 60gr/m2 veya 70gr /m2 and 52 micron, PP+PET green film. Any dimension between 5cm – 60cm can be made on request. On request, 100 m lenght can be produced as well. Products can be produced with your trademark.

The Kit Contains one single Multicap PRP Tube, one spinal needle and a blood collection needle.

Centrifuge for PRP CGF and PRF Treatment 4 Tube Capacity Exclusive software for each operation UV Sterilized inner

10 sedimentation tubes can be placed at the same time. Waiting for 30 minutes gives the result of 1 hour sedimentation test.

PRP Full Kit

Doratek Titanium, Peek & Knotless Suture Anchor Systems Fully Threaded Titanium Anchor That Maximize Fixation Simplify Arthroscopic Glenohumeral Joint Instability Repair Increases The Precision of The Final Construct

Grade 304 stainless steel Three block drawer Stainless steel adjustable feet Flexible production in different designs and dimensions All kinds of stainless materials and equipment needed in central sterilization units, operating rooms and hospital rooms are produced in our organization with Hakerman Quality. Moon Table Swimwear Table Material and Medicine Cabinet hand washing units Mask and Bonnet cabinets It is produced specially for your needs, you can choose the dimensions and the features.

4A Sterilization Control Products are used to supervise sterilisation process. 4A Sterilization Control products are produced with water based non toxic paint. Our indicators that conform with ISO 11140-1 certificates are products that provide convenience to users to evaluate the sterilization process and result. All products can be produced with your trademark.

. A night guard is a mouthpiece you wear while you sleep that forms a protective layer between your upper and lower teeth. They will prevent you from doing any damage to your teeth or jaw caused by teeth grinding during sleep.

Ergonomic design Positive and negative pressure control Utmost precision 30 Bar (435 PSI) pressure resistant 20 / 30 ml Volume options ISO13485:2016 ISO9001:2015 Medical Devices Directive (93/42/EEC)

The Kit contains 2 pcs of Monocap PRP Tubes (with Anticoagulant) and1 pc Activation Tube (Ca+) with all application accessories. Monocap tube has vacuum, 9 ml blood collection capacity. Blood is filled with vacuum from the same cap (rubber stopper) and PRP is taken from the same cap after centrifugation. Since it has a single cap, it is named as MONOCAP. It is a classic system. Since the Buffy Coat is spread over a wide surface after centrifugation, PRP collection requires high experience.

chemical indicator in compliance with ISO 11140-1 will show a clear colour change from pink to black after successful steam sterilization steam indicator strips are designed to be used in steam sterilizers operating at 121-134 °C -1.5ATM- 3.5 min

indicator in compliance with ISO 11140-1 will show a clear colour change from pink to black after successful steam sterilization.SECURİTY LOCKS FOR STERİLİZATİON ARE LOCKED BY USİNG DURİNG THE PROCESS, THE LOCKS MUST BE BROKEN TO OPEN

It has a vacuum, 12 ml blood collection capacity. Blood is filled with vacuum from the upper lid (rubber stopper) and PRP is taken from the lower lid after centrifugation. Thus, the surface on which the needle touches remains sterile, which is its difference from a single cap. It has been named MULTICAP because it has a double cover. Since Buffy Coat is dispersed over a wide surface after centrifugation, PRP collection requires high dexterity.

4A Autoclave Tape is an adhesive tape used in autoclaving to indicate whether a specific temperature has been reached. 4A Autoclave Tapes has a Type 1 indicator. 4A Autoclave Tape works by changing color after exposure to temperatures commonly used in sterilization processes. Tape also features a chemical indicator to verify that it has gone through the sterilization process. They are a safe solution for closing wrapping materials. 4A Autocalve Tape assortments are as follows: Steam Autoclave Tape: 19mm x 50m (4ASAT1950) and 25mm x 50m (4ASAT2550); Ethylene Oxide Autoclave Tape: 19mm x 50m (4AEOT1950) and 25mm x 50m (4AEOT2550); Formaldehyde Autoclave Tape: 19mm x 50m (4AFOT1950) and 25mm x 50m(4AFOT2550); Hydrogen Peroxide (Plasma) Autoclave Tape: 19mm x 25m (4APT). Autoclave Tape without indicators: 19mm x 50m (4AAT1950) and 25mm x 50m (4AAT2550); *Note: Optional sizes are available upon request.

Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. Biological indicators, depending on the specific type, can be used for various sterilization processes using steam, hydrogen peroxide gas or ethylene oxide. We have the following 4A Biological Indicator types: 4A Steam Biological Indicator (3h) is specifically designed for the monitoring steam sterilization processes at 121 – 134 °C. The final readout of a processed biological indicator with respect to the indicator type should be made after 3 hours (4ARSBI) or 24h (4ASBI) of incubation at 60+/- 2 °C. 4A Ethylene Oxide Biological Indicator (4AEOBI) is specifically designed for the monitoring of ethylene oxide (EO) sterilization processes.

3-minute, 6-minute or 20-minute mixing options are available.

It has a blood collection capacity of 14 ml. After centrifugation, Buffy Coat is adjusted to the narrow section in the middle and collected very comfortably from the top cover with an injector. It gives high platelet concentration. There is almost no problem of PRP collection in double and single capped tubes. Very high quality PRP is obtained in every application. Since the design structure is similar to the Hourglass, it is also called Hourglass PRP.

Doratek Titanium, Peek & Knotless Suture Anchor Systems Fully Threaded Titanium Anchor That Maximize Fixation Simplify Arthroscopic Glenohumeral Joint Instability Repair Increases The Precision of The Final Construct

The medical waste bucket produced by MOSLAB consists of three parts. - Resistant to sharp and penetrating medical wastes. - It is disposable. - After it is completely filled, it should be sent for disposal.

Full Kit contains all PRP application accessories. It has the capacity to take 14-18 ml of blood. After the centrifuge, the Buffy Coat is adjusted to the narrow section in the middle and collected very comfortably with the injector from the top cap. It gives high platelet concentration. PRP collection problem in double and single cap tubes is almost non-existent with this design. High quality PRP is obtained in every application. Since the design structure is similar to Hourglass, it is also called Hourglass PRP.