Termékek vonatkozom (32)

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !! Name:Hygrostick Temperature measuring range:-20...+50 °C Accuracy:±1 °C Humidity measuring range:0...100% RH Humidity accuracy:±3% RH at room temperature Response time temperature:60 s typ. Power supply:Battery 2x1.5 V (AAA) Dimensions:(LxWxH) 170 x 48.5 x 16.5 mm Features:HOLD, Min/Max, °C/°F, Battery-display, automatic switch-off Weight:0.0734 kg

Ausgerüstet mit robustem Gehäuse und einem Messelement aus Edelstahl ist der Sensor besonders widerstandsfähig und für härteste Umgebungsbedingungen geeignet, auch die Einbaulage hat keinen Einfluss auf das Messsignal. Der integrierte Messverstärker wandelt die Messsignale direkt in störsichere und über längere Strecken übertragbare Spannungssignal oder Stromsignal um. Für hochviskose Stoffe steht eine frontbündige Membran M12 x 1 zur Verfügung, damit kann störendes Totvolumen ausgeschlossen werden. Zur Messung des Umgebungsdrucks (Messart relativ) befindet sich eine kleine Öffnung geschützt auf der Rückseite des Sensors. Bei der Option absolut messend wird der angelegte Druck gegen ein eingeschlossenes Vakuum gemessen. Als elektrischer Anschluss steht ein Ventilstecker DIN 43650A oder ein M12 x 1, 4-poliger Anschluss zur Verfügung. Messbereiche:0 … 0,05 bar bis 0 … 500 bar Messart:Druckmessung gegen Atmosphäre Ausgangssignal:0 … 10 V / 0 … 5 V / 4 … 20 mA Gebrauchstemperaturbereich:-40 ... +105 °C Berstdruck/ -Schutz:900 % über Nenndruck Totvolumen:0,5 cm³

If, in a highly sensitive control system, the amplification should, for example, be so arranged that the control circuit will be stable with the mean slope (gradient) of the sensor, then it is important to be aware of any variations there may be in that slope (Fig. 12a, Fig. 12b). If, at any point, the gradient is appreciably steeper than the mean gradient, then there will be a higher closed-loop gain in this position and this could lead to feedback oscillation. If, on the other hand, the gradient is less steep at some point than the mean gradient, then repeatability would be reduced and there would be less control accuracy. If we relate this type of local gradient variation gl to the mean gradient go of the potentiometer, then this criterion is independent of the potentiometer length and can be used for the direct comparision of various potentiometers.

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !! Name:Hygrostick Temperature measuring range:-20...+50 °C Accuracy:±1 °C Humidity measuring range:0...100% RH Humidity accuracy:±3% RH at room temperature Response time temperature:60 s typ. Power supply:Battery 2x1.5 V (AAA) Dimensions:(LxWxH) 170 x 48.5 x 16.5 mm Features:HOLD, Min/Max, °C/°F, Battery-display, automatic switch-off Weight:0.0734 kg

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !! Name:Hygrostick Temperature measuring range:-20...+50 °C Accuracy:±1 °C Humidity measuring range:0...100% RH Humidity accuracy:±3% RH at room temperature Response time temperature:60 s typ. Power supply:Battery 2x1.5 V (AAA) Dimensions:(LxWxH) 170 x 48.5 x 16.5 mm Features:HOLD, Min/Max, °C/°F, Battery-display, automatic switch-off Weight:0.0734 kg

The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...6 bar pressure measuring variant:relative pressure Burst pressure:18 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Application temperature:-20...+80 °C Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.182 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...10 bar Burst pressure:25 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...16 bar Burst pressure:40 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

Establo robusto, exacto, confiable, de largo plazo, acero inoxidable, para los medios líquidos y gaseosos, para las medidas estáticas y dinámicas CARACTERÍSTICAS La medición se extiende a partir de 0… barras 1000 a 0… barras 5000 Exactitud el < 0.5% Conveniente para los medios líquidos y gaseosos Calificado para las medidas dinámicas Hecho del acero inoxidable Sensibilidad estandardizada a 2.0 mV/V Tipo:relativa Tecnología:de galga extensométrica Señal de salida:analógico Otras características:de acero inoxidable

The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...10 bar pressure measuring variant:relative pressure Burst pressure:30 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.182 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...100 bar Burst pressure:175 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...400 bar Burst pressure:700 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The pressure sensors are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...16 bar pressure measuring variant:relative pressure Burst pressure:48 bar Electrical connection:4-pole industrial plug, DIN 43650 Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.182 kg

The pressure sensors are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...6 bar pressure measuring variant:relative pressure Burst pressure:18 bar Electrical connection:4-pole industrial plug, DIN 43650 Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.1832 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...40 bar Burst pressure:100 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...160 bar Burst pressure:280 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...1.6 bar Burst pressure:4 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The pressure sensors are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...4 bar pressure measuring variant:relative pressure Burst pressure:12 bar Electrical connection:4-pole industrial plug, DIN 43650 Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.1832 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...2.5 bar Burst pressure:6.25 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...200 bar Burst pressure:450 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg

The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...4 bar pressure measuring variant:relative pressure Burst pressure:12 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.182 kg

The pressure sensors are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...10 bar pressure measuring variant:relative pressure Burst pressure:30 bar Electrical connection:4-pole industrial plug, DIN 43650 Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.1832 kg

Acciaio inossidabile compatto, robusto, esatto, per i mezzi liquidi e gassosi, per le misure statiche e dinamiche CARATTERISTICHE La misurazione varia da 0… barre 30 - 0… barre 500 Esattezza < 0.1% Produca 0… 5 V, 0… 20 mA o disponibile 4… 20 mA Adatto a mezzi liquidi e gassosi Può essere usato per le misure dinamiche e statiche Fatto di acciaio inossidabile, certo e robusto Sensibilità standardizzata a 1.0 mV/V Tipo:relativa Tecnologia:a membrana Segnale di uscita:analogico Altre caratteristiche:compatto, per liquidi e gas Più caratteristiche:in acciaio inossidabile,di precisione

The pressure sensors with M12-connection are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:0...16 bar pressure measuring variant:relative pressure Burst pressure:48 bar Electrical connection:M12-Connector Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.182 kg

Acero compacto, robusto, exacto, inoxidable, para los medios líquidos y gaseosos, para las medidas estáticas y dinámicas CARACTERÍSTICAS La medición se extiende a partir de 0… barras 30 a 0… barras 500 Exactitud el < 0.1% Haga salir 0… 5 V, 0… 20 mA o 4… 20 mA de disponible Conveniente para los medios líquidos y gaseosos Puede ser utilizado para las medidas dinámicas y estáticas Hecho del acero inoxidable, confiable y robusto Sensibilidad estandardizada a 1.0 mV/V Tipo:relativa Tecnología:de membrana Señal de salida:analógico Otras características:compacto, para líquido y gas Más características:de acero inoxidable, de precisión

Acier inoxydable compact, robuste, précis, pour des médias liquides et gazeux, pour des mesures statiques et dynamiques DISPOSITIFS La mesure s'étend de 0… barres 30 à 0… barres 500 Exactitude < 0.1 % Produisez 0… 5 V, 0… 20 mA ou 4… 20 mA de disponible Approprié aux médias liquides et gazeux Peut être employé pour des mesures dynamiques et statiques Fait de l'acier inoxydable, fiable et vigoureux Sensibilité normalisée à 1.0 mV/V Type de pression:relative Technologie:à membrane Signal de sortie:analogique Montage:non spécifié Autres caractéristiques:en acier inoxydable, de précision Plus caractéristiques:compact, pour liquides et gaz

With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available. Measuring range:0 … 0,05 bar to 0 … 500 bar Kind of measurement:Against atmospheric pressure Signal output:0 … 10 V / 0 … 5 V / 4 … 20 mA Range of operating temperature:-40 ... +105 °C Burst pressure/ -protection:900 % over capacity Dead volume:0.5 cm³

The pressure sensors are ideally suited for measuring of static and dynamic relative pressure in liquids and gases. Name:Stainless steel pressure transducer Pressure measuring range:-1...1 bar pressure measuring variant:relative pressure Burst pressure:5 bar Electrical connection:4-pole industrial plug, DIN 43650 Process connection:G1/2" Output signal:0…10 V Raw material:ceramic measuring cell Housing material:Stainless steel AISI 303 Application temperature:-20...+80 °C Temperature Coefficient:TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K Remainiing error linearity/hysteresis:<±0.4% FS Power supply:12...30 V DC/ 5 mA or 12...30 V AC / 5 mA Protection category:IP67 EMC-noise emission:2011 EMC-noise withstanding:2007 Weight:0.1832 kg

High-precision pressure sensors from the 8201 series provide exact measurements while exhibiting very little sensitivity to mechanical stresses. Their application therefore goes well beyond research and development laboratories. They are also outstandingly suited to industrial use in quality assurance or for measurement and control tasks in production. Their robust mechanical and electrical construction guarantees good long-term stability and high reliability, while being resistant to aggressive media – which can be measured in liquid or gaseous states. The structure of the sensors includes no mechanical moving parts, which is why they show so little sensitivity to impact and vibration. The pressure sensors can be configured with options to suit the user. Standard types are available ex-stock, and customized customer versions can also be provided. Aeras of application are: —Research and developmemt —Test rigs —Mechanical engineering —Plant control and monitoring Measuring range:0 ... 500 bar Kind of measurement:Against atmospheric pressure Signal output:0 … 5 V / 0 … 20 mA / 4 … 20 mA Range of operating temperature:-30 ... +120 °C Burst pressure/ -protection:> 100 % over capacity Dead volume:5.8 cm³

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. The ceramic sensors are based on the approved thick-film technology and accurate for high-precision measurement. Name:Ceramic relative pressure sensor pressure measuring variant:relative pressure Pressure measuring range:0...25 bar Burst pressure:62.5 bar Application temperature:-40...+105 °C Operating voltage:5...30 VDC Bridge resistor:10 ±20% kΩ Connection:Flat cable, RM 1.27 x 40 mm length Dimensions:Ø18 x 6.35 mm Environmental data:RoHS 2002/95/EG compliant Weight:0.0174 kg