Termékek orvosi (38)

Coliques, crampes digestives et gaz 1 Le saviez-vous? Lors de chacun de ses repas, qu’il soit allaité ou qu’il prenne un biberon, le bébé avale de l’air. Chez certains nourrissons, cet air ne s’évacue pas correctement et va s’accumuler dans le tube digestif sous forme de petites bulles d’air. Leur accumulation peut alors entraîner des crampes douloureuses pour le bébé qui se caractérisent par des pleurs incontrôlables et inexpliqués, souvent après les repas. Pour plus d’informations et conseils visitez le www.imutis-colic.be. Propriétés Imutis Colic contient de la siméticone qui permet aux petites bulles d’air de se regrouper afin d’en former des plus grandes. Celles-ci pourront dès lors être évacuées plus facilement par l’organisme. Une utilisation à plus long terme contribue à prévenir la formation de bulles d’air. Le plus Trenker Imutis Colic contient de la siméticone dans un support à base d’huile d’olive, ce qui permet d’améliorer son efficacité contre les bulles d’air. Un...

Dit boek legt de nadruk op het belang van een gezonde balans tussen Omega-3 en Omega-6 vetzuren. Het biedt gedetailleerde informatie over de bronnen van deze vetzuren en hoe ze bijdragen aan de algehele gezondheid. Dit boek is een waardevolle gids voor iedereen die zijn dieet wil optimaliseren en meer wil leren over de rol van vetzuren in het lichaam. Het is een must-have voor gezondheidsbewuste individuen die hun kennis willen vergroten.

As pharmaceutical architecture becomes increasingly complex, so does its sensitivity to oxygen and contamination. EVALâ„¢provides superior oxygen and chemical barriers that offer safe and transparent alternatives to PAN, PVDC and aluminium foil. Â Add EVALâ„¢ barrier to a wide range of packaging options from pouches, SUP and overwrap to bottles to formed push-through packs. For the most sensitive applications, unique oxygen scavenging EVALâ„¢, adds extra safety and extends shelf life by reducing oxygen ingress to zero.

High Quality Type IIR Surgical Mask/ Medical Mask, Ready Stock in Belgium. Used for for all kinds of clinical personnel in non-sterile operation and non-invasive operation process wear. Covers the users mouth, nose and jaw.

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control). Any types of organic lenses:SV, PAL’s, multifocal (freeform or conventional) Diameter:44 to 80 mm Maximum power for positive axis (at distance and near):+10D Minimum power for negative axis:-12D Cylinder:0 to 4D Max prism at PRP:5 Δ Max prism at measurement point:12 Δ Max total lens height:20mm Max front surface sag:17mm Accuracy Diameter:0.2mm Accuracy Sphere and cylinder powers:0.03D to 6.00D, 0.04D to 12D Accuracy Prism:Sphere and cylinder 0.03 Δ + 1% Accuracy Thickness:0.03mm Covered area for Error Map:from -12D to +5D, 40mm from +5D to +10D Throughput:50 sec. / job Instrument size:H776 x L737 x W618mm Weight:62 Kg – 67 Kg with Digital Inking

Un cabinet médical Portakabin offre des options illimitées aux patients ainsi qu’au personnel médical. Que vous réorganisiez ou complétiez vos installations existantes, vous pouvez choisir entre un espace médical temporaire ou une construction médicale permanente. Espace personnalisable Les constructions de cabinets médicaux peuvent être personnalisées avec une grande variété de conceptions extérieures et d’aménagements intérieurs prêts à accueillir un nombre illimité de personnes. Cabinets médicaux entièrement conformes et prêts à l’emploi Que nous intégrions des zones administratives dans un bâtiment hospitalier ou que nous concevions des constructions de cabinets médicaux modulaires, vous pouvez être sûr que notre service de gestion de projet vous fournira un espace de travail prêt à l’emploi comme promis, pendant que vous maintenez votre service habituel.

Promotion médicale Type de produit:Pièce imprimée et thermoformée Matériaux:PVC Machine:Thermoformage Affiche 3D Type de produit:Pièce imprimée et thermoformée Matériaux:PVC Machine:Thermoformage

Air purification unit for cleaning room air The Pro air purification unit cleans the air inside the room. The Pro unit is used for the protection of vulnerable (immune-compromised) patients, protection against infectious patients, the elimination of aspergillus during renovation works, and for the upgrading of air quality in operating theatres, ICUs, isolation rooms. The Pro unit gives immediate results (within 20 minutes max) and once deployed maintains integrity of the air quality at all times. The life-time of the high efficiency particulate air filter inside the unit is therefore largely extended. The prefilters are supplied in packages and are easily changed.

Traitement des douleurs ou de raideurs articulaires HYAFLEX est préconisé dans le traitement des douleurs ou de raideurs articulaires résultant d'une ostéoarthrite dégénérative ou post-traumatique du genou en remplacement ou en association d'une thérapie non pharmacologique traditionnelle ou d'un traitement analgésique. Propriétés Toutes les articulations synoviales, notamment les articulations portantes qui soutiennent le poids du corps, contiennent de l’acide hyaluronique viscoélastique. Cette substance a des propriétés lubrifiantes et protectrices contre les chocs. La diminution du stress sur le cartilage lui permet de se régénérer et donc diminue la progression de l’ostéoarthrite. L’acide hyaluronique (masse moléculaire 650 ~ 1200 kDa) contenu dans HYAFLEX est un polysaccharide naturel provenant de micro-organismes (Streptococcus zooepidemicus) puis purifié. HYAFLEX est injecté dans la cavité articulaire pour restaurer le liquide synovial. Utilisation Il est recommandé...

Traitement pour les douleurs et raideurs articulaires HYAFLEX FORTE est préconisé dans le traitement des douleurs ou de raideurs articulaires résultant d'une ostéoarthrite dégénérative ou post-traumatique du genou en remplacement ou en association d'une thérapie non pharmacologique traditionnelle ou d'un traitement analgésique. Propriétés Toutes les articulations synoviales, notamment les articulations portantes qui soutiennent le poids du corps, contiennent de l'acide hyaluronique viscoélastique. Cette substance a des propriétés lubrifiantes et protectrices contre les chocs. La diminution du stress sur le cartilage lui permet de se régénérer et donc diminue la progression de l'ostéoarthrite. L'acide hyaluronique stabilisé contenu dans HYAFLEX FORTE est un polysaccharide naturel provenant de micro-organismes (Streptococcus zooepidemicus) puis purifié. HYAFLEX FORTE est injecté dans la cavité articulaire pour restaurer le liquide synovial. Utilisation Le traitement par HYAFLEX...

EVAL's largest use world-wide is for food packaging. Since 1972, EVALâ„¢ has helped reduce food waste by blocking oxygen ingress and contaminants, extending shelf life and avoiding product waste. EVAL provides the functional gas and contamination barrier to the entire structure. The result has often been a reduction in packaging waste by reducing the weight and amount of packaging materials used, without compromising on function. Â EVAL barrier properties avoid vitamin and fat oxidation, extending shelf life of parenteral nutrition. Compared to standard plastic packaging, additive content can be guaranteed for longer, even while reducing the necessary doses. EVAL barrier can be added to many different types of light weight, unbreakable and halogen-free all-plastic packaging, improving safety in use and reducing environmental impact.

Grâce à une solution de construction flexible de Portakabin, vous pouvez proposer une panoplie de services de santé de proximité, tels que le traitement des maladies, les diagnostics préventifs, les conseils, ainsi que le stockage ou la délivrance de médicaments. Toutes les infrastructures dont vous avez besoin En tant que fournisseur expérimenté d’espaces médicaux, Portakabin peut personnaliser ses bâtiments fabriqués avec précision pour créer tout ce qu’il faut, des pharmacies aux salles de consultation et de soins, aux bureaux et aux entrepôts. Livré sans perturbation Qu’il s’agisse d’agrandir des bâtiments existants ou d’aménager des espaces entièrement nouveaux, lorsque vous choisissez Portakabin, vos services peuvent continuer à fonctionner sans interruption. En effet, vos bâtiments sont créés hors site et les travaux de terrassement sont effectués simultanément sur place.

As product formulas become more complex, they often become more volatile andsensitive to oxygen. EVALâ„¢ provides a functional barrier in both directions: assuring formula integrity and quality while blocking the permeation of external gases and contaminants. Unbreakable all-plastic barrier structures with EVALâ„¢ allow transparencyand squeezability for safe and convenient use. In addition to flexible pouches and SUP, typical applications inlcude ampoules, bottles, eye liquid dosers and inhalers.

In addition to oxygen and CO 2 gas barrier, EVAL™ provides an outstanding odour barrier, especially useful for ostomy applications. EVAL™’s functional barrier works in both directions, protecting contents against contamination while keeping them from escaping into the environment. Flexible barrier structures provide an efficient disposable solution for biomanufacturing. When incinerated, the tiny but functional amounts of EVAL™ in the structure release only CO 2 and water vapour.  No dioxin, no metal residue.

EVAL is already used world-wide to improve the safety, shelf life and process efficiency of packaging for baby food and other infant formulas. With a reliable performance, shelf-stable packaging can be designed to safely limit the total amount of oxygen ingress. Quality is assured and shelf life is extended, notably by protecting fat and vitamin content against oxidation. Additional safety and extended shelf life with oxygen scavenger For the most oxygen-sensitive products, EVALâ„¢ grades with oxygen scavenging capacity can create a negative oxygen increase, providing extra safety margins and extending product shelf life.

EVAL offers a reliable alternative to aluminium foil, with excellent stress crack and pinhole resistance. Multilayer barrier films with EVALâ„¢ can be laminated onto a varietyof different substrates to provide sachets with functional barrier. Sealable and anti-scalping Specific grades of EVALâ„¢ film can be laminated to a substrate, providing the sachet or pouch with both barrier properties and a sealable internal contact layer with excellent anti-scalping properties.

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected The operating range of the instrument exceeds the normal requirements of the lab.:Optical power in the main axis Optical power in the main axis:-20D to +20D Prism power:0 to 5 cm/m (S= -14D increasing with S) A computer Server (required for first unit) is capable of supporting an indefinite number of FOCOVIS:A printer to provide a ticket with the measured information A printer to provide a ticket with the measured information:An integrated thickness measuring system An integrated thickness measuring system:A visualisation system for the positioning of bifocals and progressives A visualisation system for the positioning of bifocals and progressives:A vacuum holding system A vacuum holding system:Our company Our company:Products products :Services Services:References/Experiences References/Experiences:News News :Contact Contact:test

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran The operating range of the instrument exceeds the normal requirements of the lab.:Optical power in the main axis Optical power in the main axis:-20D to +20D Prism power:0 to 5 cm/m (S= -14D increasing with S) The FOCOVISION measures the optical lens power by transmitting a light beam, in all directions (360 :It accurately measures optical power to 0.02D and prism power to 0.02 cm/m, +1%. It accurately measures optical power to 0.02D and prism power to 0.02 cm/m, +1%.:Prism compensator Prism compensator:3 dots marking system 3 dots marking system:Thickness measurement device Thickness measurement device:LCD display device. Contour shape display LCD display device. Contour shape display:Vacuum holder Vacuum holder:Alignment system for polarized lenses Alignment system for polarized lenses:Working table Working table:Our company Our company:Products products :Services Services:References/Experiences References/Experiences:News News :Contact Contact:test

Pre-filtration filters on the outside of the unit Indoor work leads to an increased concentration of aspergillus. In order to protect the high effiency particulate air filter inside the unit during building activities, pre-filtration frames with filters are added to the outside of the device. The life-time of the high efficiency particulate air filter inside the unit is therefore largely extended. The prefilters are supplied in packages and are easily changed.

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl. Diameter (via shape measurement):44 to 80 mm NB : grippers also designed to handle cut lenses NB:grippers also designed to handle cut lenses Max. power for positive axis:+10.00D Min. power for negative axis:-10.00D Cylinder:0 to +4.00D DPT:0.04 D CYL:PRISM PRISM:0.03cm/m + 1° Contactless thickness meausrement:0.04mm 150 jobs/hour:L = 191cm L = 191cm:W = 140 cm W = 140 cm:H = 192 cm (without Laminar flow box) H = 192 cm (without Laminar flow box):Laminar flow box Laminar flow box:Table for rejected lenses Table for rejected lenses:Our company Our company:Products Products:Services Services:References/Experiences References/Experiences:News News:Contact Contact:test

The Focovision by Reflection SR-2 is used in the production of semifinished lenses, glass and metal molds,but also in prescription laboratories to control the incoming semi-finished lenses. It measures the surface optical power by reflection on one point with a high degree of accuracy. The measured value can be expressed in curvature or in diopter. The Focovision by Reflection has become a worldwide reference instrument throughout the ophthalmic industry. High accuracy (0.01D for the base power, less than 0.01D for the residual astigmatism of the instrument) Very high reproducibility Precise and reproducible positioning of the lens according to reference points marked over the lens surface Simple and rapid autocalibration procedure No moving parts (behaviour stability, simple lighting system, ...) Linear instrument response (no mechanical adjustments are necessary) Reliability : Image quality control & automatic correction of dust effect

Combi 1.1 – Innovating product – Better and cheaper than Laminar Flow – Adjustable Air Nozzles for perfect airflow – Creates high efficiency Cleanroom Class ISO6 or even ISO5 – Installation: 1 day max. – Results within 30 minutes – Clean Air Capacity: 800 m3/hour maximum, with 1/4 of fresh air (optional) – Only needs W 90 cm x H 154 cm x D 34 cm of wall space – Quiet operating level – Max. distance between inside & outside unit: 25 meter To protect immune compromised patients To upgrade ICU’s, laboratories and O.T’s Note Pressure difference depends on air tightness of the room. For information and advice contact MedicCleanAir.

The Control Unit for Prescription Lenses is a machine dedicated to prescription labs producing at least 1000 jobs per day. This multi-functional automatic machine is the only one on the market to combine the lens inspection according to the ISO/ANSI standards of all lens types, the mapping of freeform lenses, the flexible digital inking and the laser engraving. The measurement data exported by the machine are very useful for an effective process control. The Control Unit for Rx lenses is the perfect tool to increase your customer satisfaction, by improving your quality and optimizing the delivery times. Diameter:44 to 85 mm Maximum power for positive axis:+14.00D Minimum power for negative axis:-12.00D Cylinder:0 to + 7.00D Prism:10cm/m Max. prism value at measurement point:12 cm/m Total lens height:< 20mm Sag convex surface:< 17mm Sphere and cylinder:0.02D to 6.00D 0.03D to 14.00D:0.02cm/m + 1% Thickness without contact:0.04 mm 120 jobs/hour:Digital Inking (UV or solid ink) Digital Inking (UV or solid ink):Inking alignment check Inking alignment check:Laser engraving (CO2) Laser engraving (CO2):Dual Spectrometer (by transmission & reflection) Dual Spectrometer (by transmission & reflection):Ionisation system Ionisation system:Laminar flow box Laminar flow box:Our company Our company:Products Products:Services Services:References/Experiences References/Experiences:News News:Contact Contact:test

Isolation Unit, 1-piece, for positive or negative room pressure This Isolation Unit is made for installation in suspended or false ceilings, and walls. Can be connected to an existing ventilation system or new tube system. Reccommended for installations were the point of extraction and supply are further away from eachother. Depending on the installation, positive (for immune-compromised) or negative (for infectious patients) pressure is generated inside the room (easily up to 20 Pascal). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured. – Automatic differential pressure regulation – Automatic pressure loss alert – Filter detection by ID code (filter condition) – Complies with CDC guidelines (Centres for Disease Control and Prevention) Used in hospitals, clinics and medical facilities Immune-compromised patients Oncology, haematology, neonato

The AutoPacker is designed for use in mid to large volume prescription laboratories. After the job-identification, the lenses are unloaded from the job tray and centered. An envelope type is chosen from the magazine out of eighteen different envelope types, the lens is inserted in the envelope, and a label is printed and applied to the flap of the envelope which seals the envelope shut. Before loading the packaged lens into its original job tray a check is made to ensure the envelope is not empty.The machine is also capable of packing cut lenses. The 600 lenses per hour capacity and the completely automatic cycle which avoids any mispackaging, coupled with our years of experience in the field of packaging RX glasses are proof of its value. This machine is best utilized after the Automatic Control and Inking Unit.

Identification &amp; Inking Unit for semi-finished lenses (type MITSF) The new concept of MITSF machine is designed to identify and print progressive and multifocalsemi-finished lenses. The PPOS system, integrated in the unit, detects the μ-engravings or the upper segment line and identifies the semi-finished by reading the identification code (check of product code, Addition, base, eye, logo at the edge or under the μ-engravings) by Optical Character Recognition. The inspected lenses are then inked by a robot, permitting a large flexibility in image choice (10 plates – 20 images). The data of this machine can be transmitted to the automatic packaging unit, eliminating any product mispack. Diameter:65-85 mm Concave radius:80 mm to infinity (flat lenses) Convex radius far view:60 to 300 mm Overall thickness:7 to 25 mm Max. overall height:25 mm Add power:0.75D to 3.75D Positioning of the inking image in accordance to the micro-engravings:Concentricity : 0.5 mm Parallelism : 1.5 mm Concentricity:0.5 mm Parallelism:1.5 mm Centering diameter:+/- 0.5 mm Stamping accuracy on polarized lenses:+/- 2° Our company:Products Products:Services Services:References/Experiences References/Experiences:News News:Contact Contact:test

The Automatic Packaging Unit for Semi-Finished Lenses is dedicated to large scale packaging requirements of progressive semi-finished lenses. It packages 720 lenses per hour by choosing the correct plastic cup and box type out of ten cup choices and five box types. After being correctly matched to cup and box, the lens is packaged and sorted into 24 double magazines of 15 packaged lenses each, according to several different criteria that is operator set. Through the use of this machine with the Fully Automatic Pad Printing Unit for Semi – Finished Lenses, complete control and packaging is obtained with almost no operator intervention. By adding several options of diameter, center thickness, and curvature measurements, the machine can be used for packaging single vision and multifocal semi-finished lenses. Lens diameter 65 mm to 85 mm:Convex base Convex base:2 - 10D Overall thickness:7 to 25 mm Lens type:semi-finished lenses (round) Specially designed for an automatic picking:Squared with sides varying from 70 to 85mm Squared with sides varying from 70 to 85mm:Overall height (cup + lens) 20 to 30 mm Overall height (cup + lens) 20 to 30 mm:Height height:20 to 32 mm width:50 to 75 mm Capacity:15 lens cartons in one storage box Dimensions:height : 450 mm width : 70 to 85 mm depth : 70 to 85 mm height:450 mm width:70 to 85 mm Depth:24x2 stacks of 15 boxes 24x2 stacks of 15 boxes:720 lenses/hour 720 lenses/hour:3 bacode readers (check of the plastic cup, box & label) 3 bacode readers (check of the plastic cup, box & label):Second box height Second box height:Separate manual data entry station Separate manual data entry station:FOCOVISION by Reflection to identify single vision lenses FOCOVISION by Reflection to identify single vision lenses:LENSMAPPER by Reflection and segment measurement to identify bifocal lenses LENSMAPPER by Reflection and segment measurement to identify bifocal lenses:Automatic Identification and Pad Printing Unit for Semi-Finished Lenses (MTSFO) Automatic Identification and Pad Printing Unit for Semi-Finished Lenses (MTSFO):Our company Our company:Products products :Services Services:References/Experiences References/Experiences:News News :Contact Contact:test

Isolation Unit, 2-piece, for positive or negative room pressure This Isolation Unit is made for installation on walls or windows. Pressure differences up to 20 Pascal are easily generated. Negative pressure is obtained when the filter unit is placed inside the room, and the ventilator unit is placed outside the room. (infectious patients) Positive pressure is obtained when the ventilator unit is placed inside the room and the filter unit is placed outside the room. (immune-compromised patients). Both parts are connected by a tube – through the wall – which contains an air back-pressure flap (standard) and fire damper (optional). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured. – Automatic differential pressure regulation – Automatic pressure loss alert – Filter detection by ID code (filter condition) – Complies with CDC guidelines (Centres for Disease Control and Prevention)

Isolation Unit, 1-piece, for positive or negative room pressure This Isolation Unit is made for installation in suspended or false ceilings, and walls. Can be connected to an existing ventilation system or new tube system. Reccommended for isolation rooms up to 40m2 / 120m3. Depending on the installation, positive (for immune-compromised) or negative (for infectious patients) pressure is generated inside the room (easily up to 20 Pascal). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured. ISO520 can be used with Remote Control RC100 or RC200.

Remote controllers with key switches or with key switches and screen-displays for permanent 100 % security, used with all MedicCleanAir units. Remote controller RC 200 with key switches and screen-displays Integrated function keys for selecting mode. Constant pressure difference display. Illuminated display for operating data recognition. Key switch for secure functional change. Secure operation by qualified personnel only. Choice of incremental speed option. Setting for required pressure difference (automatic at Step 4 with ISO unit). Choice of filter test duration (for PRO air purification unit at level 4). Alarm function (visual and acoustic) for pressure difference. Alarm function (visual and acoustic) for filter condition.