Termékek poliimid (105)

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

BIEGLO bietet fertige oder halbfertige Teile an, die direkt aus Polyimidpulver mit allen Eigenschaften von gesintertem PI hergestellt werden. BIEGLO bietet fertige oder halbfertige Teile an, die direkt aus Polyimidpulver mit allen Eigenschaften von gesintertem PI hergestellt werden. Direktformteile haben den Vorteil, dass die Kosten sinken, wenn die Stückzahl steigt. Aufgrund von nahezu null Prozent Abfall während der Produktion kann dies eine wirtschaftlichere Produktionsmethode sein. Bearbeitete Teile werden häufig für Präzisionsanwendungen in kleinen Serien eingesetzt. Polyimid-Direktformteile können in verschiedenen Anwendungen eingesetzt werden: Automobilindustrie: Kraftstoffleitung im Rennsport.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

BIEGLO bietet Polyimidschläuche mit Innendurchmessern von 2 mm bis zu 100 Mikron. BIEGLO bietet Polyimidschläuche mit Innendurchmessern von 2 mm bis zu 100 Mikron. Unsere Polyimidschläuche werden hauptsächlich in der Medizinindustrie für Katheter oder neurovaskuläre Anwendungen eingesetzt. Dexnyl-Polyimde-Schläuche werden aus thermoplastischen Polyimiden extrudiert und bieten eine hervorragende Schub- und Rückführbarkeit sowie eine extrem glatte Oberfläche und Transparenz. Die Einhaltung der USP-Klasse VI (USP 6) ist selbstverständlich gegeben.

Starting with the base polymer TECASINT 5011, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high wear strength during chip test applications in the semiconductor industry. It has good electrical insulation properties and surface hardness, and also high rigidity. The glass transition temperature is 340°C, while the maximum service temperature may be – for a short time – up to 300 °C.

Unsere Dexnyl-Polyimidfolie aus thermoplastischem Polyimid. BIEGLO bietet PI-Filme mit einer Dicke von 25 µm oder noch dünner. Über dieses Produkt Unsere Dexnyl-Polyimidfolie aus thermoplastischem Polyimid. BIEGLO bietet PI-Filme mit einer Dicke von 25 µm oder noch dünner. Der Polyimidfilm bietet eine hohe Wärmebeständigkeit, eine ausgezeichnete Spannungsfestigkeit sowie eine optimale Dimensionsstabilität. Polyimidfolien können in der Elektronikindustrie aufgrund ihrer dielektrischen Isolationseigenschaften sowie in der Draht- und Kabelindustrie eingesetzt werden. Unsere Polyimidfolie hat eine natürliche rotbraune Farbe und ist transparent.

polyimide tubing,polyimide flexible heaters,similar kapton flexible heaters - Polyimide Tubing Polyimide Tubing / Polyimide Film Spiral Wrapping Tubing has good mechanical and useful performance at low and high temperature, can keep the dielectric strength and size stablity at low and high temperature environment. It suitable for F, H Level application and -35~180 degree high temperature environment. Inner Diameter: 0.016-- 2.000 inch; Wall Thickness: 0.001 --0.008 inch; Density: 1.41 g/cc Application: 1Polyimide tube with 400 degree high temprature 2.resistance high temperature 3, space technology, F,H level electric machine, electrical insulation, PTC heater, heat protector Battery splice. 4, FPC (Flexible printing circuit board), PTC electrothermal film, TAB (Pressure sensitive adhesive tape base materials), spaceflight, aviation. Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-tape.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation.

Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low coefficient of friction. Owing to its self lubricating property, TECASINT 2061 is very good for dry application. The material is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide sheets. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. In line with different requirements of the industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide sheet can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries.

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000 product line semi-finished products. Our polyimide semi-finished products meet the highest demands of various industries, such as the aerospace or the automotive industry. The polyimide semi-finished products are available as solid rods or sheets. Tubes can be produced as short, direct formed pieces. Polyimide semi-finished products are available in various compounds, for example with PTFE or graphite for better coefficients of friction. Polyimide sheets are available in the standard size 305mm x 305mm and a thickness of 1.6mm up to 50.8mm. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

TECASINT 6032 is a highly filled grade for direct forming parts with low coefficient of thermal expansion and high creep resistance.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

TECASINT 8061 has been made from PTFE with a modification of 40 % PI. Compared with TECASINT 8001 it has a lower creep tendency under load, along with outstanding sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

Polyimide Resin Polyimide Resin Powder are known for thermal stability, good chemical resistance, excellent mechanical properties, and characteristic orange/yellow etc color.Thermoset polymer matrix polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of up to 360 °C. Composite Polyimide Resin Powder (PTFE composite wholly aromatic polyimide resin powder) It is used for compounding with polytetrafluoroethylene (PTFE). Generally, the addition amount is 5%-15%, which can greatly improve the wear resistance of PTFE and slightly improve the heat resistance of PTFE.Characteristics: High temperature resistance, self lubrication, friction resistance, easy processing. Application: Bearing, shaft, bearing, seal gasket, etc. Yancheng Tiandi Insulation Co.,Ltd web :https://www.polyimide-pi.com/polyimide-powder-varnish.htm mail: hsinsulation@aliyun.com hsinsulation@hotmail.

TECASINT 5501 ESD light-brown is an electrically modified polyimide based on the further development of TECASINT 5111. By modifying it with special additives, the PI plastic has a static dissipative effect and thus achieves a surface resistance of 10 E6-10 E8 Ohm. The ESD material is therefore ideally suited for applications where electrostatic dissipation is to be ensured. Like all polyimide resins, TECASINT 5501 ESD light-brown is highly resistant to thermal and mechanical stress. The glass transition temperature is 329 °C and the short-term service temperature is 300 °C. In addition, the PI material is characterised by its high creep resistance. The PI Polyimide also offers a very low thermal expansion of 2.6 10-5 K-1, a high surface hardness and very good stiffness values. This makes TECASINT 5501 ESD light-brown suitable for applications in the semiconductor industry, electronics industry, cryogenics or in nuclear and vacuum technology.

Polyimide Fiber polyimide fiber products have good mechanical properties and excellent properties of high temperature resistance, flame retardant resistance, radiation resistance and decay resistance. 1 Fineness dtex 1.5~5 2 Density g/cm3 1.41 Polyimide Yarn Polyimide Yarn can be used toweave High temperature flame retardant protectivefabrics ,and also can be used asreinforcing materialin the composite material. polyimide Yarn can be long-termused in 260℃.For its’ excellent flame retardance and insulation character and light weight,it is widely applied in cable sheath for the aircraft and watercraft. Furthermore, with the outstanding character in U-V resistance, oxidative resistance,anti-hygroscopicity,polyimide filament is grateful in theoutdoors cable sheath. 1) High temperature filter 2) Protective Fabric 3) Fire resistant and heat insulation material Yancheng Tiandi Insulation Co.,Ltd https://www.polyimide-pi.com hsinsulation@aliyun.com, hsinsulation@hotmail.com

Polyimide Rod PI(Polyimide) has an excellent mechanical and thermal dimensional stability,dielectric properties,wear-resistance,permeability wave,and self-lubricating properties. Properties: 1) Flame resistance/high radiation-resistance 2) Excellent thermal properties/electrical properties 3) Corrosion-resistance/wear-resisting Yancheng Tiandi Insulation Co.,Ltd. https://www.polyimide-pi.com/polyimide-sheet.htm hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS Q 70 20. Its previous name was SINTIMID Pur HT.

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

Polyimide Foam Polyimide foam insulation material synthesizes the structural and performance advantages of polyimide resin and porous material, is one of the foam materials with the best thermal stability among the polymers; this product not only has such advantages as non-combustible, smokeless, non-toxic, and resistance to high and low temperature which are the inherent features of matrix resin, but also has such functions as thermal insulation protection, acoustic noise reduction and damping vibration reduction of foam porous material, and it can be used in many fields, such as shipping, aviation, aerospace, high-speed rail, electronic instrument. 1) Excellent flame retardant properties, oxygen index ≥36%. 2) Temperature: -196℃---500℃; long-term use can 260℃. 3) Apparent density: 4.5-250kg/m3 Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-foam Email: hsinsulation@aliyun.com hsinsulation@hotmail.

TECASINT 8001 yellow brown has been made from PTFE with a modification of 20% PI. Its properties include reduced creep under load and excellent sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

BIEGLO offers polyimide tubes with inner diameters starting from 2mm and going down to 100 micron. Our polyimide tubing are mainly used in the medical industry for catheters or neurovascular applications. Dexnyl polyimde tubings are extruded from thermoplastic polyimides and offer excellent pushability and tractability as well as ultra-smooth surface and transparency. USP class VI (USP 6) compliance is of course a given.

Polyimide Sheet similar Vespel SP1,similar Vespel SCP-5000,similar Meldin;Polyim - Manufacturer of Polyimide Film,Polyimide Tape,Polyimide Fiber,Polyimide Yarn,Polyimide Foam,Polyimide Coverlay Film(CL),Polyimide Stiffener，Bonding Film,Flexible Printed Circuit Board(FCCL) for FPC PCB. Black Coverlay,White Coverlay,Transparent Coverlay，Anti Ion-migration Coverlay，Bonding Sheet(Anti Ion-migration)，PI Stiffener. Polyimide Sheet similar Vespel SP1,similar Vespel SCP-5000,similar Meldin;Polyimide Plastic,Polyimide Plate,Polyimide Rod in china. Yancheng Tiandi Insulation Co.,Ltd. https://www.polyimide-pi.com/polyimide-sheet.htm hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

TECASINT 1021 black has been developed from the base polymer TECASINT 1011 natural. Unlike TECASINT 1011, however, it contains 15% graphite. The material has improved friction and wear properties for tribological applications. TECASINT 1021 is suitable for both lubricated and dry applications since it is self lubricating.

BIEGLO offers finished or semi-finished parts directly formed from polyimide powder with all the attributes of sintered PI. The advantage of direct formed parts are the lower costs as quantitiy is increasing. Due to almost zero percent waste during production it can be a more economic production method. Machined parts are widely used for small series high precision applications. Polyimide direct formed parts can be used in different applications: Automotive industry: racing engine fuel line. Jet engine: vane bushing or lock nut insert. Industrial machinery: hotrunner systems nozzles or plasma cutting torch as gas distributers or sealing components. Semicon HDPCVD Equipment: e.g. heater coil spacer. Life sciences: rotor seal or pneumatic surgical tool vane.

BIEGLO is the official distributor of Saint Gobain Performance Plastics for the Meldin 7000, Polyimide rod. In line with different requirements of the Industrial market, the Meldin product family can provide high temperature resistance, wide chemical resistance, good mechanical properties also at elevated temperatures and low wear, long lifetime. Polyimide rod can be used in temperatures up to 350°C continuously and it has various applications in the automotive, aerospace and electronic industries. Polyimide rods have a standard length of 965mm. The diameters of the solid bars are distributed from 6.3mm to 82.5mm.

Cable Wrapping Polyimide F46 Tape,Double-Side Polyimide Tape,Die-Cutting PI Tape - Manufacturer of Polyimide Tape in china. 1) Polyimide Silicone Tape 2) Polyimide Acrylic Tape 3) Cable Wrapping Polyimide F46 Tape 4) Anti-Static Polyimide Tape 5) Black Polyimide Tape 6) Polyimide Tape With Liner 7) Double-Side Polyimide Tape 8) Die-Cutting Polyimide Tape Yancheng Tiandi Insulation Co.,Ltd Web: https://www.polyimide-pi.com/polyimide-tape.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600