Termékek szar (142)

Graphite Filament yarn with High Temperature Graphite impregnation Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Yarn of highest puricity >99 % C content Universally chemical resistant The addition of high temperature Graphite impregnation increases the cross section density and works as a stable pressure cushion for the graphite fiber Flexible, ressistant ot wear and surface protecting Excellent in temperature cycling, since graphite has a similar coefficient of expansion as steel Excellent as bullring for packing made of expanded graphite Operating range Pressure [p max]: 30 bar, Velocity [v max]: 15 m/s Pressure [p max]: 300 bar Temperature: t = -40… +600 °C pH: 1 - 14 Density: 1.00 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Valves Fittings Gate valves Flaps Suitable for Power plant technology Boiler houses High pressure- and high temperature...

Vis moletée polyamide à tige filetée, acier ou inox MATIERE - Thermoplastique noir (polyamide). - Vis en acier zingué ou en inox(AFNOR Z 8 CNF 18-09, Werk 1.4305, AISI 303).

• Livello di prestazione per i requisiti illuminotecnici più elevati • Ottimo rapporto di distribuzione della luce diretta e indiretta per un'illuminazione omogenea e a norma di ampie superfici di calcolo, ad es. con un LAVIGO TWIN-T in posizione centrale possono essere illuminate fino a quattro postazioni di lavoro • Quota diretta con tecnologia Edgelight e Lightguide per un’uscita di luce omogenea • Illuminazione VTL biodinamica per le postazioni in ufficio • Retrofittabile con modulo TALK

Manette indexable zamac à tige filetée MATIERE - Corps de manette en zamac chromé ou pelliculé orange (RAL 2004) ou noir (RAL 9005). - Tige filetée en acier bruni.SUR DEMANDE Couleurs : - Noir RAL 9011 : N - Rouge RAL 3000 : R - Argenté RAL 9006 : A - Sans pelliculage : S

Il consolidato sistema Visual Timing Light (VTL) viene integrato per la prima volta in un normale apparecchio a stelo per la simulazione della luce diurna. VIVAA.free offre luce biodinamica per migliorare le prestazioni di giorno e migliora la qualità del sonno di notte. L’apparecchio a stelo è da subito pronto per l’uso e può essere integrato in maniera flessibile in tutti gli ambienti e ambiti della vita. Dettagli pregiati trasformano il VIVAA in un elegante complemento d’arredo. Per la perfetta integrazione dell’architettura d’interni sono disponibili due versioni: l’apparecchio d’illuminazione classico con gambe in legno oppure quello moderno con base in metallo. It’s my light! Subito utilizzabile grazie a Plug & Light Una quota di luce indiretta consente un effetto di luce ottimale A scelta con equipaggiamento VTL (autarchico) Altri design del paralume su richiesta Dimmerabile Economico grazie all’elevata efficienza energetica Flusso luminoso: 7000 lm*

Sauterelle à tige coulissante renforcée, verticale MATIERE - Corps en fonte malléable laquée. - Rivets en inox. - Points d'articulation graissés. - Levier et tige en acier traité, zingué, passivé. - Poignée ergonomique en plastique bi-matière rouge et noir résistant aux huiles. - Livrée avec vis de placage traitée zinguée 26-59.SUR DEMANDE Autres couleurs de poignée pour les références 26-110-50 et 26-110-70 : - Jaune : J - Orange : O - Bleu : B - Vert : V - Noir : N

100 % PTFE Fiber with Unique Blocking Agent Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Very low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustment Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.65 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry General Industry Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections is...

Sb72nsb E A Src - En Iso 20345:2011 - SABOTS Pointure:36 - 45 Tige:Cuir fleur grainé avec élastiques extensibles pour l'ajustement du cou de pied Embout:Acier inoxydable Semelle:PU mono-densité, injectée sur tige Première de proprieté:EVA perforée aérée

Ge06s1 - En Iso 20345:2011 - CHAUSSURES DE SÉCURITÉ BASSE Pointure:36 - 45 Tige:Cuir fleur grainé et tissu synthétique Matelassage:Mousse Doublure:Tissu Embout:Acier inoxydable Semelle:PU mono-densité, injectée sur tige Première de proprieté:EVA perforée aérée

Sauterelle à tige coulissante courte, inox MATIERE - Inox (AFNOR Z 6 CN 18-09, Werk 1.4301, AISI 304) poli. - Poignée ergonomique en plastique bi-matière rouge et noir résistant aux huiles. - Livrée avec vis de placage traitée zinguée 26-59.SUR DEMANDE Autres couleurs de poignée : - Jaune : J - Orange : O - Bleu : B - Vert : V - Noir : N

Braid of Flexible Expanded Natural Graphite Tape Reinforced with Inconel Wire Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use valve packing Expanded graphite of higher quality Coefficient of expansion similar to steel For valve applications rings should be approx. 20 - 25 % compressed at installation Precompressed rings are recommended Operating range Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.20 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Power plant technology Petrochemical plants Boiler houses High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special...

Pre-compressed Packing set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing fulfills with a tested leckage of 6.3  x 10 -6 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate EU 10/2011 / EG 1935:2004 FDA

Braided of Flexible Expanded Graphite Tape with High Temperature Metal Mesh Reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal plant wide use in static applications Extrusion stability through ultrafine 10 myh metal mesh reinforcement on each strand Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature and pressure resistance Suitable for: power plants, petrochemical plants, boiler houses Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves For valve applications rings should be approx. 25 - 30 % compressed at installation A 66 can be used as bullrings for style A 44, A 44 I and P 60 Die formed rings are recommended Operating range Pressure [p max]: 500 bar Temperature: t = -200… +650 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in...

Pre-compressed ring-set made of expanded graphite and reinforcement to protect against extrusion Characteristics Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion and as well enhance the sealability of this valve sealing set. The set was tested and approved by the AMTEC GmbH Lauffen in Germany. The leakage parameters of 8.6 x 10-3 mbar · l/(s·m) complies with the VDI 2440 at +400 °C, which specifies a maximum allowed leakage of 1.0 x 10 -2 mbar · l/(s·m) (test media helium) and is therefore recommended as a high grade seal system. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 160 [bar] Temperature without LiveLoading: t 400 °C Temperature with LiveLoading: t 400 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Refineries Approvals TA Luft / VDI 2440 Certificate

6075/hs1 - En Iso 20345:2011 - Chaussures De Sécurité Haute Pointure:37 - 46 Tige:Cuir fleur grainé Matelassage:Mousse Doublure:Cuir Embout:Acier inoxydable Semelle:PU bi-densité, injectée sur tige Première de proprieté:EVA couvert en cuir perforée

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...

Braid of Flexible Expanded Natural Graphite Tape Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use in pumps and valves Very good dry-running characteristics No wear, perfect thermal conductivity High quality pure graphite Coefficient of thermal expansion similar to steel Rings should be approx. 20 - 25 % compressed during assembly Recommended as die formed rings Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses Petrochemical plants High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3...

Braided of Flexible Expanded Graphite Tape with High Temperature Metal Mesh Reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal plant wide use in static applications Extrusion stability through ultrafine 10 myh metal mesh reinforcement on each strand Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature and pressure resistance Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves For valve applications rings should be approx. 25 - 30 % compressed at installation A 99 can be used as bullrings for style A 44 I, P60 and ARF Die formed rings are recommended Contains effective passive corrosion inhibitor Operating range Pressure [p max]: 500 bar Temperature: t = -200… +650 °C pH: 0 - 14 Density: 1.45 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +450...

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

Du M6 au M42 nous fabriquons à la demande des anneaux à tige extra longue jusqu’à 1 000 mm. Acier normal, acier haute résistance classe 8 et acier inoxydable classe 8. Caractéristiques techniques : Accessoire de levage conforme à la directive européenne machines 2006/42/CE. Anneau forgé, usiné Marquage en relief Coefficient de sécurité : 4 Notice d’utilisation et de maintenance : CM 94-001 Montage goupillé pour les anneaux HR et en acier inoxydable. Montage soudé pour les autres anneaux. Notice d’utilisation et de maintenance : CM 14-01 Finition standard: Sablage Option: Tous traitements de surfaces classique

Pre-compressed Packing Set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage rate of 4.2 x 10 -5 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate

• Livello di prestazione per i requisiti illuminotecnici più elevati • Ottimo rapporto di distribuzione della luce diretta e indiretta per un'illuminazione omogenea e a norma di ampie superfici di calcolo • Quota diretta con tecnologia Edgelight e Lightguide per un’uscita di luce omogenea • Elemento di comando multifunzionale, facilmente raggiungibile • Emissione luminosa asimmetrica (varianti) • Illuminazione VTL biodinamica per le postazioni in ufficio • Retrofittabile con modulo TALK per apparecchi con sensore